verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SE Series · ISO 15552 Cylinder

Airtac SE50 Standard Cylinder SE50BX250SH

The AirTAC SE50 Standard Cylinder SE50BX250SH is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 250mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ50 mm
  • Stroke250 mm
  • Port sizePT1/4
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 30 mm
$136.55 $144.05Save 5% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SE50 stroke, mounting and version on one page All SE50 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SE50 Standard Cylinder SE50BX250SH

The AirTAC SE50BX250SH is a double-acting, single-rod ISO 15552 profile cylinder engineered for demanding environments. It delivers a theoretical push force of 982 N at 0.5 MPa and a maximum push capacity of 200 kgf at 1.0 MPa. Equipped with a SUS304 stainless steel rod and FKM (Viton) seals, this variant reliably operates in elevated temperatures up to 150 C, making it highly suitable for washdown or corrosive manufacturing settings.

Built with an extruded aluminum barrel that eliminates external tie rods, the body is compact and highly resistant to corrosion while allowing flush mounting on machinery. The integrated magnet (-S) directly supports AirTAC CMSE reed and DMSE electronic position sensors, which seat neatly into the sensor grooves on three sides of the profile. Furthermore, the field-adjustable pneumatic cushioning at both ends allows technicians to tune end-of-stroke deceleration, softening hard impacts during high-speed cycling.

Airtac SE50 Standard Cylinder SE50BX250SH Technical Specifications

ModelAirtac SE50 Standard Cylinder SE50BX250SH
SeriesSE ISO 15552 profile cylinder
Bore sizeØ50 mm
Stroke250 mm
Acting typeDouble acting
Port sizePT1/4
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø50mm)

PressurePush forcePull force
0.5 MPa982 N825 N
0.7 MPa1374 N—
Max (@1.0 MPa)200 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SE50 Standard Cylinder SE50BX250SH

SEISO 15552 / VDMA 24562 profile-barrel double-acting cylinder.
50Bore size in mm.
×250Stroke length in mm.
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).

Where the Airtac SE50 Standard Cylinder SE50BX250SH Is Used

conveyor_belt

Bottling Line Diverters

Utilizes the 982 N push force and 250 mm stroke to reroute glass containers on high-speed packaging lines, while the SUS304 rod and Viton seal withstand daily chemical washdowns.

precision_manufacturing

Thermoform Pinch Grippers

Employs the FKM high-temperature seal to actuate pinch mechanisms near 150 C forming ovens, using the 250 mm extension to pull heated plastic sheets securely.

science

Lab Sample Ejection

Leverages the built-in magnet with DMSE electronic sensors to confirm full 250 mm ejection of test tubes from centrifuge bays, ensuring precise sequencing in automated diagnostics.

Is the Airtac SE50 Standard Cylinder SE50BX250SH the Right Cylinder?

Selecting this 50 mm bore yields 982 N of push force at 0.5 MPa. If your application requires less force, stepping down to the 40 mm bore provides 628 N; conversely, moving up to the 63 mm bore offers 1559 N. This specific unit features a PT1/4 port, a 250 mm stroke, and the -S magnet for CMSE or DMSE sensors. Because it adheres strictly to ISO 15552 / VDMA 24562 dimensions, it serves as a direct replacement for other ISO 15552 profile cylinders, sharing standard mounting accessories like FA front flanges or LB foot brackets without requiring custom machined plates.

At a 250 mm stroke, the unsupported length of the piston rod increases the risk of bending under heavy lateral loads. To prevent premature wear on the rod bearing, incorporate an external guide rail to absorb side loads. Remember that the adjustable air cushion only decelerates the piston near the stroke ends; it is not a locking mechanism. If the machinery must hold a vertical load without live air pressure, integrate a BSE rod lock or an external pilot-operated check valve.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SE50 Standard Cylinder SE50BX250SH FAQ

At 0.5 MPa, this 50 mm bore cylinder provides 982 N of push force and 825 N of pull force. At 0.7 MPa, the push force increases to 1374 N. The maximum push capacity is 200 kgf at 1.0 MPa. Thanks to the Viton (FKM) seals, it operates safely from -20 to 150 C, with a speed range of 30-800 mm/s.

Yes, the SE50BX250SH is dimensionally interchangeable per ISO 15552 / VDMA 24562 standards. You can drop it directly into existing mounting hardware using standard FA, FB, or LB accessories. Just ensure your porting matches the PT1/4 thread and connect CMSE or DMSE sensors if you need position feedback.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SE Cylinders

Request a Quote for Airtac SE50 Standard Cylinder SE50BX250SH

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SE50BX250SH and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.