Airtac SE50 Standard Cylinder SE50BX600S
The AirTAC SE50 Standard Cylinder SE50BX600S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 600mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ50 mm
- Stroke600 mm
- Port sizePT1/4
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 30 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SE50 Standard Cylinder SE50BX600S
The AirTAC SE50BX600S is a double-acting single-rod ISO 15552 profile cylinder engineered for a 600 mm stroke. It delivers 982 N of push force and 825 N of pull force at 0.5 MPa, utilizing a PT1/4 port and a 20 mm rod with an M16x1.5 thread. Because this is a profile cylinder, the square extruded aluminum barrel eliminates external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames while exposing standardized ISO 15552 mounting interfaces.
This specific configuration includes a SUS304 stainless steel rod (code B) for corrosive or washdown environments, and a built-in magnet (code S) for position tracking. The integrated magnet interfaces directly with AirTAC CMSE reed and DMSE electronic sensors dropped into the three-sided sensor grooves. Furthermore, field-adjustable pneumatic cushioning at both ends allows technicians to tune the end-of-stroke deceleration via a screw, softening hard impacts when cycling at speeds up to 800 mm/s.
Airtac SE50 Standard Cylinder SE50BX600S Technical Specifications
| Model | Airtac SE50 Standard Cylinder SE50BX600S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 600 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø50mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE50 Standard Cylinder SE50BX600S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×600 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE50 Standard Cylinder SE50BX600S Is Used
Bottling Line Diverter
Actuates a routing gate on a stainless steel bottling line, utilizing the 982 N push force at 0.5 MPa and the SUS304 rod to withstand daily chemical washdowns.
Carton Flap Folder
Drives a 600 mm stroke folding mechanism on a corrugated packaging machine, relying on the adjustable pneumatic cushioning to soften end-stops during high-speed cycling.
Lab Sample Transport
Pushes sample racks across a 600 mm path in diagnostic equipment, tracking position via CMSE reed sensors in the barrel grooves without external tie-rod obstructions.
Is the Airtac SE50 Standard Cylinder SE50BX600S the Right Cylinder?
If your application requires less force, stepping down to the 40 mm bore yields 628 N of push at 0.5 MPa, while moving up to the 63 mm bore provides 1559 N. This 50 mm bore provides a balanced 982 N push at 0.5 MPa, peaking at 200 kgf at 1.0 MPa. Keep in mind that a standard SE cylinder does not hold its load when air is exhausted or the valve is centered; the piston will drift, so a BSE rod lock variant is required for fail-safe position holding.
Because this unit features a 600 mm stroke, the unsupported rod length increases the risk of rod-bearing bending under lateral loads. Implementing an external guide rail is strongly recommended to prevent side-load wear. For retrofitting, this cylinder is dimensionally interchangeable per ISO 15552, sharing standardized mounting footprints and hardware with other ISO 15552 profile cylinders. It uses a PT1/4 port, a SUS304 rod, and includes the -S magnet for CMSE/DMSE sensors.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE50 Standard Cylinder SE50BX600S FAQ
At 0.5 MPa, this 50 mm bore cylinder provides 982 N of push force and 825 N of pull force. At 0.7 MPa, the push force is 1374 N, with a maximum push capacity of 200 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes, the SE50BX600S is dimensionally interchangeable per ISO 15552 standards. It shares the standardized mounting interface and hardware footprint of other ISO 15552 profile cylinders, making it a direct retrofit, provided your application uses a PT1/4 port and a 600 mm stroke.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE50 Standard Cylinder SE50BX600S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.