
The AirTAC SE50 Standard Cylinder SE50X110 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 110mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE50X110 is a double-acting single-rod ISO 15552 profile cylinder delivering 982 N of push force at 0.5 MPa. It features an extruded aluminum barrel without external tie rods, creating a smooth, compact body that resists corrosion and mounts flush against machine frames. The unit is equipped with a PT1/4 port and a Ø20 mm hard-chrome rod.
This model relies on field-adjustable pneumatic cushioning at both ends, allowing technicians to fine-tune end-of-stroke deceleration via a set screw rather than absorbing shock with a fixed rubber bumper. Because this specific SKU lacks the -S magnet option, it does not directly support AirTAC CMSE or DMSE position sensors without modification.
| Model | Airtac SE50 Standard Cylinder SE50X110 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 110 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Uses the 982 N push force and 110 mm stroke to push plastic PET bottles from a main conveyor into a labeling station.
Relies on the smooth tie-rod-free profile to fold minor flaps on cardboard cartons without snagging packaging material.
Positions sheet metal blanks with precision, benefiting from the 30 mm adjustable cushion to soften hard stops at speed.
With a 982 N push at 0.5 MPa, this 50 mm bore fits squarely between the 40 mm bore (628 N push) and the 63 mm bore (1559 N push), letting you step up or down depending on your exact payload. The 110 mm stroke provides ample travel for mid-range actuation. Remember that the adjustable air cushion only decelerates the piston near the end of travel; it is not a locking mechanism, so the rod will drift if air pressure is lost. For position holding, consider the BSE rod-lock variant or an external pilot-operated check valve. Being dimensionally interchangeable per ISO 15552, it serves as a direct replacement for other ISO 15552 profile cylinders using the same mounting hardware.
AirtacDistr lists every SE50 order code with its price on one page at https://airtacdistr.com/products/airtac-se50-iso-air-cylinder
Quick checklist
At 0.5 MPa, the SE50X110 provides 982 N of push force and 825 N of pull force. At 0.7 MPa, the push force is 1374 N. The maximum push force is 200 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes, it is dimensionally interchangeable with other ISO 15552 profile cylinders and shares standard mounting dimensions. However, because this specific SKU lacks the -S magnet option, it cannot natively host AirTAC CMSE (reed) or DMSE (electronic) position sensors without modification.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.