
The AirTAC SE50 Standard Cylinder SE50X1100 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 1100mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE50X1100 is a double-acting single-rod ISO 15552 profile cylinder engineered for a 1100 mm stroke, delivering 982 N of push force and 825 N of pull force at 0.5 MPa. Its square extruded aluminum barrel eliminates external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames while surviving harsh industrial environments.
This 50 mm bore unit features field-adjustable air cushioning at both ends to decelerate the piston smoothly over its long travel. Because this specific SKU lacks the -S magnet code, it does not support CMSE or DMSE electronic position sensing without modification, making it ideal for simple mechanical ejection where end-of-stroke confirmation is mechanically handled.
| Model | Airtac SE50 Standard Cylinder SE50X1100 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 1100 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×1100 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Uses the 982 N push at 0.5 MPa to deflect heavy wooden pallets off a high-speed main conveyor line onto a reject spur without stalling the drive motor.
Leverages the 1100 mm stroke to span wide packaging machine infeeds, extending fully to fold large corrugated carton flaps prior to tape sealing.
Acts as a rigid end-stop in a sheet metal stacking cage, relying on the adjustable end cushion to absorb the kinetic energy of sliding steel blanks.
Selecting this 50 mm bore provides 982 N push at 0.5 MPa; if your payload is lighter, you can step down to the 40 mm bore (628 N push), or step up to the 63 mm bore (1559 N push) for heavier loads. As a dimensionally interchangeable ISO 15552 cylinder, it serves as a direct replacement sharing standard mounting accessories, a PT1/4 port, and a 20 mm rod.
At 1100 mm of travel, the unsupported rod mass introduces significant side-load and rod-bearing bending risks; an external guide rail is strongly recommended to prevent premature seal wear. Furthermore, this standard SE cylinder will drift if air pressure is lost or the valve is centered, so a BSE rod lock variant is required for fail-safe load holding.
AirtacDistr lists every SE50 order code with its price on one page at https://airtacdistr.com/products/airtac-se50-iso-air-cylinder
Quick checklist
This 50 mm bore cylinder generates 982 N push and 825 N pull at 0.5 MPa, 1374 N push at 0.7 MPa, and a maximum push of 200 kgf at 1.0 MPa. It uses a PT1/4 port and a 20 mm hard-chrome plated rod.
No, the adjustable air cushion only decelerates the piston near the stroke end and is not a mechanical lock. If unpowered, the rod will drift; for fail-safe load holding, you need the BSE rod lock variant or an external pilot-operated check valve.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.