
The AirTAC SE50 Standard Cylinder SE50X110S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 110mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE50X110S is a double-acting single-rod ISO 15552 profile cylinder engineered to deliver 982 N of push force at 0.5 MPa. Its square extruded aluminum barrel eliminates external tie rods, yielding a compact, corrosion-resistant body that mounts flush on packaging equipment. The integrated -S magnet enables direct fitment of CMSE reed and DMSE electronic sensors for precise end-of-travel signaling.
Field-adjustable pneumatic cushioning at both ends allows you to tune the 30 mm cushion length to soften hard end stops during high-speed 30-800 mm/s cycling. Operating pressure spans 0.15-1.0 MPa, making it a robust choice for mid-range actuation. It serves as the base body for specialized variants like the SED double-rod or BSE rod-lock cylinders when application demands evolve.
| Model | Airtac SE50 Standard Cylinder SE50X110S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 110 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Handles 110 mm routing strokes to shift plastic bottles between packaging lanes using 982 N of extend force at 0.5 MPa.
Deploys the 20 mm hard-chrome rod to drive a folding arm on a case eraser, relying on adjustable end cushions to absorb 30-800 mm/s velocity impacts.
Uses the integrated -S magnet with DMSE electronic sensors to confirm board stack height before stretch wrapping, ensuring repeatable 110 mm positioning.
If your assembly requires less force, stepping down to a 40 mm bore yields 628 N of push at 0.5 MPa, while moving up to a 63 mm bore provides 1559 N for heavier payloads. This 50 mm bore features a PT1/4 port and a 20 mm rod with an M16x1.5 thread. The built-in magnet supports CMSE and DMSE position sensing. For stroke lengths of 300 mm or greater, the bending moment on the rod bearing increases; an external guide is recommended to prevent side-load damage. Remember that this standard cylinder relies on live air pressure to hold a load—it drifts when air is lost, so specify a BSE rod lock if position holding is required.
AirtacDistr lists every SE50 order code with its price on one page at https://airtacdistr.com/products/airtac-se50-iso-air-cylinder
Quick checklist
This 50 mm bore cylinder provides 982 N of push and 825 N of pull at 0.5 MPa, 1374 N of push at 0.7 MPa, and a maximum push of 200 kgf at 1.0 MPa. It operates at speeds between 30-800 mm/s.
Yes, the SE50X110S is dimensionally interchangeable per ISO 15552 standards. Its profile barrel shares the standard mounting footprint and PT1/4 port, making it a direct replacement for other ISO 15552 profile cylinders.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.