
The AirTAC SE50 Standard Cylinder SE50X120 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 120mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE50X120 is a double-acting, single-rod ISO 15552 profile cylinder engineered to deliver 982 N of push force at 0.5 MPa and 1374 N at 0.7 MPa. Driven by a 20 mm hard-chrome plated rod, it provides a 120 mm stroke with an M16x1.5 rod-end thread and a PT1/4 port.
Unlike traditional tie-rod designs, this actuator features a square extruded aluminum barrel without external tie rods, yielding a compact, corrosion-resistant body that mounts flush in tight spaces. The field-adjustable pneumatic cushioning at both ends allows you to tune end-of-stroke deceleration via a screw, softening hard mechanical stops at operating speeds up to 800 mm/s.
| Model | Airtac SE50 Standard Cylinder SE50X120 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 120 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×120 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Provides the 982 N push at 0.5 MPa required to positively fold and seal heavy corrugated carton flaps on high-speed packaging lines.
Uses the 120 mm stroke to extend and retract a routing gate on a conveyor, smoothly handling package traffic without external tie-rod obstruction.
Secures mid-weight aluminum castings inside a machining center, utilizing the adjustable cushion to prevent shock when releasing the 20 mm rod.
Stepping up to the 63 mm bore raises the 0.5 MPa push output to 1559 N for heavier loads, while dropping down to the 40 mm bore reduces it to 628 N for lighter, faster tasks. Because this is a plain SE cylinder without a built-in magnet, it does not support CMSE or DMSE position sensing; if your sequence requires end-of-stroke feedback, specify the -S magnet option. For replacing an existing ISO 15552 unit, match the 50 mm bore, 120 mm stroke, PT1/4 port, and your required mounting accessory. Remember that the air cushion only decelerates the piston near stroke end—it does not hold a load; if power fails, the rod drifts, so a BSE rod lock is needed for secure positioning.
AirtacDistr lists every SE50 order code with its price on one page at https://airtacdistr.com/products/airtac-se50-iso-air-cylinder
Quick checklist
At 0.5 MPa, the SE50X120 delivers 982 N of push force and 825 N of pull force. At 0.7 MPa, the push force is 1374 N. The maximum allowable push force is 200 kgf at 1.0 MPa.
Yes, the SE50X120 is dimensionally interchangeable per ISO 15552 mounting interface standards. You can drop it in as a replacement for other ISO 15552 profile cylinders, matching the 50 mm bore, 120 mm stroke, and PT1/4 port.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.