
The AirTAC SE50 Standard Cylinder SE50X125SCA is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 125mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE50X125SCA is a double-acting, single-rod ISO 15552 profile cylinder engineered for 50 mm bore applications, delivering 982 N of push force and 825 N of pull force at 0.5 MPa. It features a square extruded aluminum barrel without external tie rods, which keeps the body compact, corrosion-resistant, and easy to mount flush against machine frames. The included CA single clevis accessory allows secure pivot mounting for angular load movement.
This specific configuration includes a built-in magnet (-S) for position sensing with AirTAC CMSE reed and DMSE electronic switches, fitting neatly into the standard sensor grooves on three sides of the body. The field-adjustable air cushion at both ends is a real pneumatic deceleration mechanism, not a fixed rubber bumper, allowing technicians to dial in end-of-stroke speeds and eliminate hard mechanical impacts on the 125 mm stroke.
| Model | Airtac SE50 Standard Cylinder SE50X125SCA |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 125 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×125 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Uses the 982 N push force at 0.5 MPa and CA clevis mount to pivot sorting flaps on high-speed logistics conveyor lines, handling 125 mm stroke retraction smoothly.
Applies the 825 N pull force to tension sealing tape heads on automated packaging equipment, relying on the adjustable end cushions to soften the 125 mm stroke stops.
Leverages the -S magnet with DMSE electronic sensors to confirm piston position for precise 125 mm sample tube ejection in diagnostic machinery.
When sizing this 50 mm bore actuator, evaluate your force margins: if 982 N of push at 0.5 MPa is excessive, stepping down to a 40 mm bore yields 628 N; conversely, if your load demands more authority, stepping up to a 63 mm bore provides 1559 N. Because this is a double-acting cylinder, it relies on continuous live air pressure to move and cannot hold a load in place if air is exhausted or a valve centers—if your mechanism requires static position holding without pressure, consider an AirTAC BSE rod lock variant instead. For this 125 mm stroke, the Ø20 mm rod and M16x1.5 thread handle side loads well, but any pivot-mounted assembly with heavy lateral forces should still use an external guide to prevent rod-bearing bending. As a dimensionally interchangeable ISO 15552 cylinder, it serves as a direct retrofit for other standard profile cylinders using the same PT1/4 port and CA clevis hardware.
AirtacDistr lists every SE50 order code with its price on one page at https://airtacdistr.com/products/airtac-se50-iso-air-cylinder
Quick checklist
At 0.5 MPa, this 50 mm bore cylinder provides 982 N of push force and 825 N of pull force. At 0.7 MPa, the push force is 1374 N. The maximum operating pressure is 1.0 MPa, which yields a maximum push force of 200 kgf.
Yes, it is dimensionally interchangeable per ISO 15552, serving as a direct replacement for other standard profile cylinders using the PT1/4 port and CA clevis. However, it is double-acting and does not hold its load if air pressure is lost; the adjustable air cushion only decelerates the piston near stroke end and acts as a brake.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.