
The AirTAC SE50 Standard Cylinder SE50X140 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 140mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE50X140 is a double-acting single-rod ISO 15552 profile cylinder engineered to deliver 982 N of push force at 0.5 MPa and 825 N of pull force. Its square extruded aluminum barrel lacks external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames while exposing standardized ISO 15552 dimensions for seamless retrofitting.
This 50 mm bore unit features a 20 mm hard-chrome plated rod and a PT1/4 port. Field-adjustable pneumatic cushioning at both stroke ends allows technicians to dial in end-of-stroke deceleration via a set screw, softening hard impacts during 140 mm travel. Note that this specific SKU lacks a built-in magnet, meaning it will not host CMSE or DMSE position sensors out of the box.
| Model | Airtac SE50 Standard Cylinder SE50X140 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 140 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×140 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Provides the 982 N push stroke required to mechanically fold and seal corrugated cardboard flaps at high cycle rates without crushing the packaging material.
Executes a 140 mm extend-and-retract motion to deflect parcels weighing up to 200 kgf onto secondary sorting chutes along high-speed logistics lines.
Applies consistent 0.5 MPa clamping force to secure delicate analytical instrumentation samples during automated centrifuge or testing sequences.
If 982 N of thrust at 0.5 MPa is too much for your payload, stepping down to the 40 mm bore drops the output to 628 N. Conversely, scaling up to the 63 mm bore raises the 0.5 MPa push capacity to 1559 N for heavier fixtures. Because this is a standard double-acting cylinder, the piston will drift if air pressure is lost or the valve is centered; applications requiring true mid-air holding or fail-safe braking should evaluate the BSE rod-lock variant. For ISO 15552 direct replacements, match the 50 mm bore, 140 mm stroke, PT1/4 port, and your specific mounting accessory.
AirtacDistr lists every SE50 order code with its price on one page at https://airtacdistr.com/products/airtac-se50-iso-air-cylinder
Quick checklist
The SE50X140 generates 982 N of push force and 825 N of pull force at 0.5 MPa. At 0.7 MPa, the push force increases to 1374 N. The maximum allowable push force is 200 kgf when operating at the 1.0 MPa pressure limit.
This specific SE50X140 SKU is manufactured without a built-in piston magnet, so it cannot directly support AirTAC CMSE reed or DMSE electronic sensors. If position feedback is required, you would need an S-suffixed variant equipped with the internal magnet.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.