
The AirTAC SE50 Standard Cylinder SE50X145 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 145mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE50X145 is a double-acting single-rod ISO 15552 profile cylinder delivering 982 N of push force and 825 N of pull force at 0.5 MPa. It features a 50 mm bore, a 145 mm stroke, and a PT1/4 port. The extruded aluminum barrel omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames while protecting internal components.
This unit relies on field-adjustable air cushioning at both ends to decelerate the piston near stroke end, letting technicians fine-tune end-stop impact for fast cycling. Note that this specific SKU lacks a built-in magnet, so it cannot host CMSE or DMSE position sensors without modification. The cushion acts purely as a speed damper and will not hold a load if air pressure drops.
| Model | Airtac SE50 Standard Cylinder SE50X145 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 145 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×145 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Uses the 982 N push force and 145 mm stroke to cleanly fold corrugated cardboard flaps during automated case erecting before tape sealing.
Pivots a routing arm on a packaging conveyor to split product flow into dual lanes, benefiting from the compact tie-rod-free barrel profile.
Positions sheet metal backstops on a press brake, utilizing the M16x1.5 rod thread and adjustable end cushions to absorb rapid positioning impacts.
At 0.5 MPa, this 50 mm bore cylinder provides 982 N of push force. If your assembly requires less force, the 40 mm bore neighbor offers 628 N push; if you need more power, stepping up to the 63 mm bore yields 1559 N push. Because this SKU lacks the -S magnet, you must select a variant with the S option if your control system requires CMSE or DMSE sensor feedback. As a true ISO 15552 profile cylinder, it serves as a direct dimensional replacement for any standard 50 mm bore, 145 mm stroke ISO cylinder using standard mounting accessories.
With a 145 mm stroke, side loading remains moderate, but always ensure the rod-end thread M16x1.5 and rod bearing are aligned to prevent premature wear. For strokes of 300 mm or longer, an external guide is mandatory to support the load and prevent rod-bearing bending.
AirtacDistr lists every SE50 order code with its price on one page at https://airtacdistr.com/products/airtac-se50-iso-air-cylinder
Quick checklist
The SE50X145 provides 982 N push and 825 N pull at 0.5 MPa, 1374 N push at 0.7 MPa, and a maximum push of 200 kgf at 1.0 MPa. It operates at speeds between 30 and 800 mm/s.
Yes. The SE50X145 is dimensionally interchangeable per ISO 15552 / VDMA 24562 standards, meaning it serves as a direct replacement for other 50 mm bore profile cylinders using standard mounting hardware.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.