
The AirTAC SE50 Standard Cylinder SE50X150SFTC is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 150mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE50X150SFTC is a double-acting, single-rod ISO 15552 profile cylinder engineered for 150 mm stroke applications requiring 982 N of push force at 0.5 MPa. It features a square extruded aluminum barrel without external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames. This clean profile design eliminates protruding rod bolts that could catch on adjacent mechanics or debris.
Equipped with an FTC centre trunnion mount, it handles pivotal rotations smoothly, while the integrated -S magnet enables precise position detection using AirTAC CMSE reed or DMSE electronic sensors. The field-adjustable pneumatic cushioning at both ends allows technicians to dial in end-of-stroke deceleration via a set screw, softening hard impacts at operating speeds up to 800 mm/s.
| Model | Airtac SE50 Standard Cylinder SE50X150SFTC |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 150 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Pivots an FTC-mounted dancer roll to control web tension on flexographic printing presses, utilizing the 982 N push force to counterbalance paper pull.
Drives a mechanical arm to tuck minor flaps on corrugated carton erectors, where the 150 mm stroke provides the exact travel needed for varying box widths.
Rotates a sorting flap on a package routing conveyor, relying on the -S magnet and DMSE sensor to confirm gate position before downstream products arrive.
Select this 50 mm bore when a 40 mm cylinder (628 N push at 0.5 MPa) is underpowered, but a 63 mm bore (1559 N push) is physically oversized. The FTC trunnion provides a fixed pivot point ideal for flipping mechanisms, though for straight-line loads over 300 mm, an external guide is recommended to prevent rod-bearing bending. As a true ISO 15552 cylinder, it serves as a direct replacement sharing standard mounting dimensions and a PT1/4 port. Note that the air cushion only decelerates the piston near stroke end; it does not hold the load if air pressure is lost—use a BSE rod lock for fail-safe positioning.
AirtacDistr lists every SE50 order code with its price on one page at https://airtacdistr.com/products/airtac-se50-iso-air-cylinder
Quick checklist
At 0.5 MPa, this 50 mm bore cylinder provides 982 N of push force and 825 N of pull force. At 0.7 MPa, the push force reaches 1374 N, with a maximum push capacity of 200 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes, the SE50X150SFTC is dimensionally interchangeable with other ISO 15552 profile cylinders, matching standard footprint and port sizes (PT1/4). The FTC trunnion mount and CMSE/DMSE sensor magnet are built-in, ensuring hardware and electronics compatibility.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.