verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SE Series · ISO 15552 Cylinder

Airtac SE50 Standard Cylinder SE50X150SH

The AirTAC SE50 Standard Cylinder SE50X150SH is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 150mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ50 mm
  • Stroke150 mm
  • Port sizePT1/4
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 30 mm
$90.48 $97.98Save 7% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SE50 stroke, mounting and version on one page All SE50 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SE50 Standard Cylinder SE50X150SH

The AirTAC SE50X150SH is a double-acting single-rod ISO 15552 profile cylinder engineered for rigorous actuation. It generates 982 N of push force at 0.5 MPa and accommodates a 150 mm stroke. Equipped with a Viton (FKM) seal, the operating temperature extends to 150 C, making it highly reliable in thermally aggressive zones like packaging heat tunnels or foundry deflashing lines.

The extruded aluminum barrel omits external tie rods, yielding a smooth, flush body that resists particulate buildup and simplifies bracket mounting. Field-adjustable pneumatic cushioning at both ends allows you to tune end-of-stroke deceleration, minimizing impact shock on high-speed cycles. The integrated -S magnet directly supports CMSE reed and DMSE electronic sensors for precise position feedback.

Airtac SE50 Standard Cylinder SE50X150SH Technical Specifications

ModelAirtac SE50 Standard Cylinder SE50X150SH
SeriesSE ISO 15552 profile cylinder
Bore sizeØ50 mm
Stroke150 mm
Acting typeDouble acting
Port sizePT1/4
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø50mm)

PressurePush forcePull force
0.5 MPa982 N825 N
0.7 MPa1374 N—
Max (@1.0 MPa)200 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SE50 Standard Cylinder SE50X150SH

SEISO 15552 / VDMA 24562 profile-barrel double-acting cylinder.
50Bore size in mm.
×150Stroke length in mm.
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).

Where the Airtac SE50 Standard Cylinder SE50X150SH Is Used

package_2

Shrink Wrap Tunnels

Utilizes the FKM high-temperature seal and 982 N push force to consistently drive sealing jaws inside heated packaging conveyors without elastomer degradation.

factory

Injection Mold Ejection

Leverages the 150 mm stroke and adjustable end-cushions to safely eject hot plastic automotive interior panels from molding presses at controlled speeds.

science

Lab Oven Doors

Deploys the ISO 15552 profile body and Viton seals to actuate high-temperature chamber access doors, ensuring reliable operation up to 150 C.

Is the Airtac SE50 Standard Cylinder SE50X150SH the Right Cylinder?

This 50 mm bore provides 982 N push at 0.5 MPa, striking a balance between the smaller 40 mm (628 N) and the larger 63 mm (1559 N). If your dynamic load demands higher thrust, stepping up to the 63 mm bore is advisable. Conversely, for lighter, faster routing tasks, the 40 mm bore offers a more compact footprint. The PT1/4 port and M16x1.5 rod thread are standard for this bore size.

Because this is a double-acting cylinder, it will not hold a load if air pressure is lost or the valve centers; the piston will drift. For dead-load holding, consider a BSE rod-lock variant. Furthermore, while the 150 mm stroke is well within standard limits, always verify that your side-loading forces are managed by an external guide to prevent rod-bearing bending.

AirtacDistr lists every SE50 order code with its price on one page at https://airtacdistr.com/products/airtac-se50-iso-air-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SE50 Standard Cylinder SE50X150SH FAQ

At 0.5 MPa, this 50 mm bore cylinder provides 982 N of push force and 825 N of pull force. At 0.7 MPa, the push force is 1374 N. The maximum push force is 200 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.

Yes, it is dimensionally interchangeable per ISO 15552 mounting dimensions, allowing a direct replacement for other ISO 15552 profile cylinders. The H code denotes a Viton (FKM) seal, extending the operating temperature range to 150 C for high-heat environments.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SE Cylinders

Request a Quote for Airtac SE50 Standard Cylinder SE50X150SH

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SE50X150SH and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.