
The AirTAC SE50 Standard Cylinder SE50X150SN is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 150mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE50X150SN is a double-acting, single-rod ISO 15552 profile cylinder featuring a 50 mm bore and 150 mm stroke. It delivers a robust 982 N push force at 0.5 MPa and 1374 N at 0.7 MPa, making it well-suited for mid-range industrial actuation. The extruded aluminum barrel design omits external tie rods, yielding a smooth, compact body that resists corrosion and mounts flush against machine frames.
This unit includes a built-in magnet (-S) for seamless integration with AirTAC CMSE reed and DMSE electronic position sensors along its three-side sensor grooves. Equipped with NBR seals, it operates reliably within standard temperature ranges, while the field-adjustable air cushioning at both ends allows you to fine-tune end-of-stroke deceleration to eliminate hard mechanical impacts.
| Model | Airtac SE50 Standard Cylinder SE50X150SN |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 150 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Provides the precise 982 N push and 150 mm travel needed to fold and square cardboard flaps on continuous packaging lines without crushing the material.
Acts as a high-speed routing stop on conveyor belts, using its 825 N pull force to retract the stop pin and let pallets pass smoothly.
Handles the automated opening and closing of heavy CNC lathe safety doors, utilizing the NBR seals and adjustable cushioning for quiet, impact-free operation.
Stepping down to a 40 mm bore reduces the 0.5 MPa push force to 628 N, whereas moving up to a 63 mm bore increases it to 1559 N, giving you clear scaling options if your load requirements shift. The PT1/4 port and 150 mm stroke make this a direct, direct dimensional replacement for any standard ISO 15552 cylinder. Remember that the adjustable air cushion only decelerates the piston near stroke end; it is not a locking mechanism, so loads will drift if air pressure is lost. For this 150 mm stroke, the 20 mm rod handles standard side loads adequately, but always verify bearing loads if guiding heavy offline components.
AirtacDistr lists every SE50 order code with its price on one page at https://airtacdistr.com/products/airtac-se50-iso-air-cylinder
Quick checklist
The SE50X150SN generates a push force of 982 N and a pull force of 825 N at 0.5 MPa. At 0.7 MPa, the push force is 1374 N. The maximum allowable push force is 200 kgf at 1.0 MPa.
Yes, the SE50X150SN is dimensionally interchangeable with any standard ISO 15552 profile cylinder. It shares the exact same mounting footprint, PT1/4 port size, and M16x1.5 rod thread, allowing for a seamless direct retrofit.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.