
The AirTAC SE50 Standard Cylinder SE50X155 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 155mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE50X155 is a double-acting single-rod ISO 15552 profile cylinder engineered to deliver a 982 N push force at 0.5 MPa over a 155 mm stroke. Its square extruded aluminum barrel completely eliminates external tie rods, yielding a highly compact, corrosion-resistant body that mounts flush against machine frames while leaving the integrated sensor grooves fully accessible on three sides.
Because this specific SKU is configured without a magnet, it does not support direct position sensing; you would need to specify the -S option for CMSE or DMSE switches. It does, however, feature field-adjustable air cushioning at both ends. By turning the cushion screws, you can precisely tune the end-of-stroke deceleration to absorb the 825 N retract load, preventing hard impact damage without relying on fixed rubber bumpers.
| Model | Airtac SE50 Standard Cylinder SE50X155 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 155 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×155 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Provides the precise 982 N extension force needed to push bare PCB panels from a vertical magazine into a horizontal inspection station.
Utilizes its 155 mm stroke and 825 N pull force to cleanly retract ejector pins from a small injection mold cavity without stressing the parting line.
Drives a mechanical arm that folds the minor flaps of small corrugated shipping boxes prior to the top tape sealing head.
When sizing this 50 mm bore, you can step down to the 40 mm version if your load requires less than 628 N of push force at 0.5 MPa, or step up to the 63 mm bore if you need a substantially higher 1559 N thrust. Since this model has a 155 mm stroke, the 20 mm piston rod and M16x1.5 thread provide a robust interface, but any side loading should still be managed with an external guide to prevent rod-bearing wear.
This SE50X155 is dimensionally interchangeable per ISO 15552, functioning as a direct replacement for other standard profile cylinders. To match this exact configuration, ensure your setup uses a PT1/4 port, standard mounting hardware, and acknowledge that this specific unit lacks the -S magnet for electronic position feedback.
AirtacDistr lists every SE50 order code with its price on one page at https://airtacdistr.com/products/airtac-se50-iso-air-cylinder
Quick checklist
At 0.5 MPa, this 50 mm bore cylinder provides 982 N of push force and 825 N of pull force. At 0.7 MPa, the push force increases to 1374 N, and it reaches a maximum push of 200 kgf at 1.0 MPa.
No, a standard SE cylinder cannot hold a load if air is exhausted or pressure drops; the piston will drift. The adjustable air cushion only decelerates the piston near the stroke end and does not act as a locking mechanism. For position holding, consider the AirTAC BSE rod-lock variant or an external pilot-operated check valve.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.