
The AirTAC SE50 Standard Cylinder SE50X175H is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 175mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE50X175H is a double-acting single-rod ISO 15552 profile cylinder engineered for demanding thermal environments. Equipped with a high-temperature FKM seal, it reliably operates from -20 to +150 C while delivering a robust 982 N push force at 0.5 MPa over a 175 mm stroke.
Its square extruded aluminum barrel eliminates external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames. The field-adjustable pneumatic cushioning at both ends allows technicians to tune end-of-stroke deceleration, smoothly absorbing kinetic energy without relying on fixed rubber bumpers.
| Model | Airtac SE50 Standard Cylinder SE50X175H |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 175 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Actuates a 175 mm pressing stroke on packaging film heat sealers, where the FKM seal survives continuous proximity to 150 C heating jaws.
Pushes diverting flaps on a baked-goods cooling line, using 982 N of thrust to re-route dense trays through high-temperature ambient zones.
Grips and stretches shrink-wrap material at the palletizer head, leveraging the adjustable cushion to prevent tearing during rapid 50 mm bore retraction.
Selecting this 50 mm bore makes sense when a 40 mm cylinder (628 N push @0.5 MPa) lacks thrust, but an 63 mm unit (1559 N push @0.5 MPa) is physically oversized. Because this SKU lacks a built-in magnet, it cannot host CMSE or DMSE position sensors; if automation logic requires end-of-stroke feedback, specify the -S option instead. Furthermore, a plain double-acting cylinder drifts when air pressure is lost or the valve centers—this model cannot hold a vertical load without a pilot-operated check valve or a BSE rod lock. With a 175 mm stroke, the 20 mm rod and M16x1.5 thread handle moderate side loads, though external guides remain recommended for rigid payloads.
AirtacDistr lists every SE50 order code with its price on one page at https://airtacdistr.com/products/airtac-se50-iso-air-cylinder
Quick checklist
This 50 mm bore cylinder generates 982 N push and 825 N pull at 0.5 MPa, 1374 N push at 0.7 MPa, and a maximum of 200 kgf at 1.0 MPa. The H seal option equips it with FKM Viton, extending the operating temperature range up to 150 C.
Yes. The SE50X175H is dimensionally interchangeable per ISO 15552 / VDMA 24562 standards. You can drop it directly into existing 50 mm bore mounting hardware using the standard PT1/4 port and M16x1.5 rod thread without altering the machine footprint.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.