verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SE Series · ISO 15552 Cylinder

Airtac SE50 Standard Cylinder SE50X200H

The AirTAC SE50 Standard Cylinder SE50X200H is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 200mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ50 mm
  • Stroke200 mm
  • Port sizePT1/4
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 30 mm
$92.81 $100.31Save 7% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SE50 stroke, mounting and version on one page All SE50 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SE50 Standard Cylinder SE50X200H

The AirTAC SE50X200H is a double-acting single-rod ISO 15552 profile cylinder engineered for harsh thermal environments. Equipped with a Viton (FKM) seal, it operates reliably across an expanded temperature range up to 150 C, making it suitable for hot stamping or drying ovens where standard elastomers fail. It provides 982 N of push force at 0.5 MPa alongside a 200 mm stroke.

The extruded aluminum barrel omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush in tight machine cavities. Field-adjustable pneumatic cushioning at both ends allows you to tune end-of-stroke deceleration via a set screw, protecting the 20 mm hard-chrome rod from harsh impacts. This SKU lacks a built-in magnet, so position sensing is not available without modification.

Airtac SE50 Standard Cylinder SE50X200H Technical Specifications

ModelAirtac SE50 Standard Cylinder SE50X200H
SeriesSE ISO 15552 profile cylinder
Bore sizeØ50 mm
Stroke200 mm
Acting typeDouble acting
Port sizePT1/4
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø50mm)

PressurePush forcePull force
0.5 MPa982 N825 N
0.7 MPa1374 N—
Max (@1.0 MPa)200 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SE50 Standard Cylinder SE50X200H

SEISO 15552 / VDMA 24562 profile-barrel double-acting cylinder.
50Bore size in mm.
×200Stroke length in mm.
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).

Where the Airtac SE50 Standard Cylinder SE50X200H Is Used

factory

Plastic Injection Mold Extraction

Withstands radiant heat near molds to safely strip finished plastic parts using its 982 N push force and 200 mm travel.

sync_alt

Thermal Drying Oven Doors

Actuates heavy insulated oven doors where ambient temperatures reach 150 C, leveraging the FKM seal to prevent degradation.

straighten

Hot Metal Stamping Ejection

Pushes stamped components out of heated presses, utilizing the adjustable end cushions to soften high-speed ejection impacts.

Is the Airtac SE50 Standard Cylinder SE50X200H the Right Cylinder?

This 50 mm bore generates 982 N push at 0.5 MPa. If your assembly requires less force, the 40 mm bore yields 628 N; if you need more power for heavier tooling, step up to the 63 mm bore which provides 1559 N. Because the 200 mm stroke is substantial, the unsupported piston rod is prone to bending under lateral loads, so an external guide rail is strongly recommended to prevent premature bearing wear.

As a dimensionally interchangeable ISO 15552 profile cylinder, it serves as a direct replacement for other ISO 15552 cylinders using identical mounting hardware and PT1/4 ports. Note that a standard SE does not hold its position when air pressure is lost; if your application requires static load holding during an exhaust or power-down event, you must integrate an external rod lock like the AirTAC BSE series.

AirtacDistr lists every SE50 order code with its price on one page at https://airtacdistr.com/products/airtac-se50-iso-air-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SE50 Standard Cylinder SE50X200H FAQ

This 50 mm bore cylinder provides 982 N push and 825 N pull at 0.5 MPa, 1374 N push at 0.7 MPa, and a maximum push of 200 kgf at 1.0 MPa. The H designation indicates a Viton (FKM) seal, extending the operating temperature range from -20 C up to 150 C.

No. The adjustable air cushion at both ends only decelerates the piston near the stroke limits; it does not function as a brake or locking mechanism. When air pressure is exhausted or a valve centers, the piston will drift. For fail-safe load holding, use an AirTAC BSE rod lock cylinder or an external pilot-operated check valve.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SE Cylinders

Request a Quote for Airtac SE50 Standard Cylinder SE50X200H

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SE50X200H and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.