
The AirTAC SE50 Standard Cylinder SE50X200SN is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 200mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE50X200SN is a double-acting single-rod ISO 15552 profile cylinder with a 50 mm bore and 200 mm stroke. It delivers 982 N of push force at 0.5 MPa and 1374 N at 0.7 MPa, making it a solid mid-range actuator. The extruded aluminum barrel lacks external tie rods, yielding a flush, corrosion-resistant body that mounts cleanly in tight machinery spaces.
This specific configuration includes a built-in magnet for CMSE reed or DMSE electronic position sensing, alongside NBR seals for standard pneumatic duty. Field-adjustable air cushions at both ends allow you to dial out hard end-of-stroke impacts without relying on fixed rubber bumpers.
| Model | Airtac SE50 Standard Cylinder SE50X200SN |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Drives the suction cup arms on case erectors, utilizing the 982 N push force to fold heavy corrugated board reliably at 200 mm stroke.
Actuates routing gates on inline conveyor sections, using the NBR seals and adjustable cushions to handle rapid, repetitive lateral shifts.
Kicks formed metal parts out of press beds, relying on the integrated magnet for DMSE electronic end-position verification.
If you need to step the force down, the 40 mm bore neighbor provides 628 N of push at 0.5 MPa. Stepping up to the 63 mm bore yields 1559 N, giving you a clear sizing path in either direction. Remember that a plain SE cylinder does not hold a load when air is exhausted or a valve centers; the piston will drift, so use a BSE rod lock for fail-safe holding.
Because this unit has a 200 mm stroke, it falls under the 300 mm threshold where side-load bending becomes critical, but you should still verify the rod bearing capacity if pushing heavy loads off-center. As a dimensionally interchangeable ISO 15552 cylinder, it drops directly into existing footprints using standard LB, FA, or TC mounting hardware and a PT1/4 port.
AirtacDistr lists every SE50 order code with its price on one page at https://airtacdistr.com/products/airtac-se50-iso-air-cylinder
Quick checklist
At 0.5 MPa, it provides 982 N of push force and 825 N of pull force. At 0.7 MPa, the push increases to 1374 N. The maximum push is 200 kgf at 1.0 MPa, and the operational speed ranges from 30 to 800 mm/s.
Yes. The SE50X200SN is dimensionally interchangeable per ISO 15552 standards. You can drop it into existing machinery using standard mounting accessories and the PT1/4 port, provided your application uses standard NBR-compatible air filtration.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.