
The AirTAC SE50 Standard Cylinder SE50X240S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 240mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE50X240S is a double-acting single-rod ISO 15552 profile cylinder engineered to deliver 982 N of push force at 0.5 MPa. Its square extruded aluminum barrel eliminates external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames while exposing standardized ISO 15552 interfaces for universal hardware interchangeability.
This specific unit includes a built-in magnet (-S) for non-contact position detection via AirTAC CMSE reed or DMSE electronic sensors. To protect payloads at cycle ends, field-adjustable pneumatic cushioning at both ends allows you to tune the 30 mm cushion length to soften hard mechanical stops, ensuring smooth deceleration rather than relying on a fixed bumper.
| Model | Airtac SE50 Standard Cylinder SE50X240S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 240 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×240 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Applies 982 N of push at 0.5 MPa to cleanly fold heavy corrugated cardboard flaps on automated packaging lines, using the 240 mm stroke to clear varying box heights.
Swings heavy pallets across transfer stations; the extruded no-tie-rod profile mounts flush to conveyor frames, while the -S magnet triggers DMSE sensors to confirm diversion.
Ejects formed sheet metal parts from stamping dies, relying on adjustable end cushions to absorb kinetic energy and prevent shock loads across the 240 mm extension.
This 50 mm bore generates 982 N push at 0.5 MPa, sitting neatly between the 40 mm bore (628 N push) and the 63 mm bore (1559 N push) for precise load scaling. Because it is a double-acting cylinder, it relies on continuous live air pressure to hold position; if air is lost or the valve centers, the piston drifts, so a BSE rod lock variant is required for fail-safe load holding.
For a 240 mm stroke, the 20 mm rod and M16x1.5 thread provide robust load capacity, but long unsupported strokes invite rod-bearing bending; an external guide is recommended to prevent side-load damage. As a true ISO 15552 profile cylinder, it serves as a direct dimensional replacement for equivalent 50 mm bore ISO 15552 cylinders, utilizing the PT1/4 port and matching standard mounting accessories.
AirtacDistr lists every SE50 order code with its price on one page at https://airtacdistr.com/products/airtac-se50-iso-air-cylinder
Quick checklist
At 0.5 MPa, the 50 mm bore provides 982 N push and 825 N pull. At 0.7 MPa, push increases to 1374 N, with a maximum push of 200 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
No, the adjustable air cushion only decelerates the piston near stroke end and is not a brake. If air is lost, a standard SE cylinder will drift under load. For secure vertical holding, use a BSE rod lock variant or an external pilot-operated check valve.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.