
The AirTAC SE50 Standard Cylinder SE50X250SN is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 250mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE50X250SN is a double-acting single-rod ISO 15552 profile cylinder engineered to deliver 982 N of push force at 0.5 MPa and 1374 N at 0.7 MPa. Featuring a 50 mm bore and a 250 mm stroke, this unit relies on a square extruded aluminum barrel that eliminates external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames.
This model incorporates a built-in magnet (-S) for direct compatibility with AirTAC CMSE reed and DMSE electronic position sensors. It also utilizes an NBR seal assembly, field-adjustable pneumatic cushioning at both ends to soften end-stop impacts, and a PT1/4 port interface.
| Model | Airtac SE50 Standard Cylinder SE50X250SN |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 250 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×250 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Drives the mechanical arms on case erectors, using the 982 N push force and 250 mm stroke to fold corrugated board into square shapes securely.
Actuates routing gates on conveyor lines, relying on the 825 N retract force to pull diverter arms back into their resting position between cycles.
Opens and closes heavy machine tool safety enclosures, where the NBR seal maintains reliable operation in standard shop environments.
Stepping down from this 50 mm bore, the 40 mm frame provides 628 N of push at 0.5 MPa, whereas stepping up to the 63 mm bore increases that output to 1559 N. Because this is a 250 mm stroke, the 20 mm rod and thread interface face bending moments under high side loads; integrating an external guide rail prevents premature rod-bearing wear. As a dimensionally interchangeable ISO 15552 component, it serves as a direct replacement sharing standard mounting hardware, a PT1/4 port, and the -S magnet spacing.
AirtacDistr lists every SE50 order code with its price on one page at https://airtacdistr.com/products/airtac-se50-iso-air-cylinder
Quick checklist
At 0.5 MPa, the SE50X250SN provides 982 N of push force and 825 N of pull force. At 0.7 MPa, the push force is 1374 N. The maximum push force is 200 kgf at 1.0 MPa, and the operational speed range is 30-800 mm/s.
No, the field-adjustable air cushion at both ends only decelerates the piston near the stroke ends to prevent hard impacts; it is not a locking mechanism. If your application requires position holding without live pressure, you must use an external rod lock or a BSE series cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.