verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SE Series · ISO 15552 Cylinder

Airtac SE50 Standard Cylinder SE50X30SH

The AirTAC SE50 Standard Cylinder SE50X30SH is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 30mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ50 mm
  • Stroke30 mm
  • Port sizePT1/4
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 30 mm
$80.25 $87.75Save 8% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SE50 stroke, mounting and version on one page All SE50 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SE50 Standard Cylinder SE50X30SH

The AirTAC SE50X30SH is a double-acting single-rod ISO 15552 profile cylinder engineered for short-stroke actuation in thermally demanding environments. It delivers a robust 982 N push at 0.5 MPa, utilizing a 50 mm bore and a 30 mm stroke. Equipped with a Viton (FKM) seal, this unit reliably operates in ambient temperatures up to 150 C, making it ideal for hot-end manufacturing.

Its square extruded aluminum barrel eliminates external tie rods, yielding a compact footprint that mounts flush against machine frames while resisting corrosion. The integrated magnet (-S) supports CMSE reed and DMSE electronic position sensors, which seat directly into the multiple sensor grooves machined into the barrel body.

Airtac SE50 Standard Cylinder SE50X30SH Technical Specifications

ModelAirtac SE50 Standard Cylinder SE50X30SH
SeriesSE ISO 15552 profile cylinder
Bore sizeØ50 mm
Stroke30 mm
Acting typeDouble acting
Port sizePT1/4
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø50mm)

PressurePush forcePull force
0.5 MPa982 N825 N
0.7 MPa1374 N—
Max (@1.0 MPa)200 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SE50 Standard Cylinder SE50X30SH

SEISO 15552 / VDMA 24562 profile-barrel double-acting cylinder.
50Bore size in mm.
×30Stroke length in mm.
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).

Where the Airtac SE50 Standard Cylinder SE50X30SH Is Used

precision_manufacturing

Injection Mold Extraction

Utilizes the 982 N push force and 30 mm stroke to positively eject hot plastic parts from core pins, where the FKM seal survives continuous radiant heat up to 150 C.

package_2

Heat-Seal Jaw Actuation

Drives short-stroke sealing jaws on continuous form-fill-seal equipment, withstanding ambient packaging heat while triggering DMSE electronic sensors for precise cycle timing.

science

Lab Oven Door Latch

Locks and releases high-temperature thermal processing oven doors, leveraging the compact tie-rod-free profile to fit within tight insulated panels without binding.

Is the Airtac SE50 Standard Cylinder SE50X30SH the Right Cylinder?

Selecting this 50 mm bore provides 982 N of push force at 0.5 MPa. If your application requires less power, stepping down to the 40 mm bore yields 628 N; conversely, moving up to the 63 mm bore provides 1559 N. Because the 30 mm stroke is very short, rod-bearing side-load bending is minimal, though external guides remain best practice for rigid lateral loads. The PT1/4 port and standard ISO 15552 mounting dimensions ensure you can swap this directly into existing fixtures using standard FA, LB, or TC accessories. Note that the adjustable air cushions at both ends decelerate the piston near stroke end but do not lock the load; if position holding is required without live air pressure, consider the BSE rod-lock variant.

AirtacDistr lists every SE50 order code with its price on one page at https://airtacdistr.com/products/airtac-se50-iso-air-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SE50 Standard Cylinder SE50X30SH FAQ

At 0.5 MPa, this 50 mm bore cylinder provides 982 N of push force and 825 N of pull force. At 0.7 MPa, the push force increases to 1374 N, with a maximum push capacity of 200 kgf at 1.0 MPa. The FKM seal allows operation from -20 to 150 C at speeds of 30-800 mm/s.

Yes. The SE50X30SH is dimensionally interchangeable per ISO 15552 / VDMA 24562 standards. You can drop it directly into existing mounting hardware using the standard PT1/4 port and 50 mm bore footprint, provided your mounting accessory matches the ISO interface.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SE Cylinders

Request a Quote for Airtac SE50 Standard Cylinder SE50X30SH

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SE50X30SH and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.