
The AirTAC SE50 Standard Cylinder SE50X375SLB is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 375mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE50X375SLB is a double-acting, single-rod ISO 15552 profile cylinder engineered for demanding pneumatic tasks. It delivers a robust 982 N push force at 0.5 MPa alongside an 825 N pull force, utilizing a 50 mm bore and a 375 mm stroke. This specific configuration includes an LB foot mounting bracket for rigid base mounting and a built-in magnet (S) for position sensing.
Designed with a square extruded aluminum barrel that eliminates external tie rods, the body is inherently compact and highly resistant to corrosion. The integrated magnet interfaces directly with AirTAC CMSE reed and DMSE electronic sensors along the three sensor grooves. Furthermore, the field-adjustable pneumatic cushioning at both stroke ends allows technicians to fine-tune end-of-travel deceleration, effectively softening hard impacts without relying on fixed rubber bumpers.
| Model | Airtac SE50 Standard Cylinder SE50X375SLB |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 375 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×375 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Actuates a routing flap on a high-speed packaging conveyor, utilizing the 982 N push force to reliably redirect heavy cartons at 375 mm stroke.
Positions the backgauge finger on a sheet metal press brake, where the LB foot mount ensures rigid alignment and the S magnet confirms gauge position.
Drives a secondary ejector plate in a plastic injection molding machine, using the adjustable end cushions to protect the 375 mm stroke from harsh mechanical stops.
This 50 mm bore strikes an excellent balance for mid-range force needs, but sizing depends on your exact load. If your application requires less force, stepping down to the 40 mm bore drops the 0.5 MPa push output to 628 N, conserving air. If you need more thrust, the 63 mm bore increases the 0.5 MPa push to 1559 N. Keep in mind that a standard SE cylinder cannot hold a load if air pressure drops or the valve centers; the piston will drift. For position holding without live pressure, consider the BSE rod lock variant.
Because this model features a 375 mm stroke, the unsupported rod length during extension introduces a risk of rod-bearing bending under heavy side loads. For optimal longevity and to prevent premature seal wear, pair this cylinder with an external guide rail to support the payload. This unit is dimensionally interchangeable per ISO 15552, meaning it serves as a direct replacement for other ISO 15552 cylinders using the same LB foot mount, PT1/4 port, and 375 mm stroke.
AirtacDistr lists every SE50 order code with its price on one page at https://airtacdistr.com/products/airtac-se50-iso-air-cylinder
Quick checklist
At 0.5 MPa, this 50 mm bore cylinder provides 982 N of push force and 825 N of pull force. At 0.7 MPa, the push force increases to 1374 N, with a maximum push capacity of 200 kgf at 1.0 MPa. The operating speed range is 30-800 mm/s.
Yes, the SE50X375SLB is dimensionally interchangeable per ISO 15552 standards. It shares the exact mounting footprint, PT1/4 port size, and 375 mm stroke dimensions, allowing it to serve as a direct retrofit for other ISO 15552 profile cylinders.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.