verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SE Series · ISO 15552 Cylinder

Airtac SE50 Standard Cylinder SE50X40SH

The AirTAC SE50 Standard Cylinder SE50X40SH is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 40mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ50 mm
  • Stroke40 mm
  • Port sizePT1/4
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 30 mm
$80.25 $87.75Save 8% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SE50 stroke, mounting and version on one page All SE50 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SE50 Standard Cylinder SE50X40SH

The AirTAC SE50X40SH is a double-acting, single-rod ISO 15552 profile cylinder engineered for a 50mm bore and a 40mm stroke. It generates 982N of push force at 0.5MPa and 1374N at 0.7MPa, making it well-suited for compact, high-cycle clamping and positioning tasks. The extruded aluminum barrel design omits external tie rods, yielding a smooth, corrosion-resistant exterior that mounts flush within tight machine envelopes.

This specific configuration includes a built-in magnet (-S) for position sensing via CMSE reed or DMSE electronic switches, and an FKM (Viton) seal (-H) that extends the operating temperature range up to 150°C. Field-adjustable air cushioning at both stroke ends allows you to fine-tune deceleration, preventing harsh impact when cycling rapidly at up to 800mm/s.

Airtac SE50 Standard Cylinder SE50X40SH Technical Specifications

ModelAirtac SE50 Standard Cylinder SE50X40SH
SeriesSE ISO 15552 profile cylinder
Bore sizeØ50 mm
Stroke40 mm
Acting typeDouble acting
Port sizePT1/4
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø50mm)

PressurePush forcePull force
0.5 MPa982 N825 N
0.7 MPa1374 N—
Max (@1.0 MPa)200 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SE50 Standard Cylinder SE50X40SH

SEISO 15552 / VDMA 24562 profile-barrel double-acting cylinder.
50Bore size in mm.
×40Stroke length in mm.
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).

Where the Airtac SE50 Standard Cylinder SE50X40SH Is Used

straighten

Injection Mold Extraction

Provides 982N of push at 0.5MPa to positively eject small plastic parts from hot mold halves, leveraging the FKM seal to withstand ambient radiant heat up to 150°C.

precision_manufacturing

Metal Stamping Ejector

Uses the short 40mm stroke for rapid, high-frequency ejection of stamped sheet metal components, relying on adjustable end cushions to soften end-stop impacts at high cycle rates.

science

Lab Oven Conveyance

Actuates a diverter gate inside a heated laboratory chamber, where the Viton FKM seal maintains integrity against continuous 150°C thermal exposure without degrading.

Is the Airtac SE50 Standard Cylinder SE50X40SH the Right Cylinder?

If your application requires less force, stepping down to a 40mm bore yields 628N of push at 0.5MPa, whereas stepping up to a 63mm bore provides 1559N. Because this is a 40mm stroke, side-loading on the rod bearing is minimal, but always ensure the load is axially aligned to prevent premature seal wear. As a dimensionally interchangeable ISO 15552 cylinder, it serves as a direct replacement for standardized 50mm bore, 40mm stroke actuators with PT1/4 ports, utilizing standard mounting hardware. Note that this cylinder relies on live air pressure to move; it will not hold a load if air is lost, as the adjustable cushion only decelerates the piston near stroke end and does not function as a mechanical lock.

AirtacDistr lists every SE50 order code with its price on one page at https://airtacdistr.com/products/airtac-se50-iso-air-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SE50 Standard Cylinder SE50X40SH FAQ

The SE50X40SH features a PT1/4 port and a 20mm rod. It generates 982N of push and 825N of pull at 0.5MPa, 1374N of push at 0.7MPa, and reaches a maximum push force of 200kgf at 1.0MPa.

No, the SE50X40SH is a standard double-acting cylinder and does not hold position or load when air is exhausted or a valve is centered. The built-in adjustable air cushions only decelerate the piston near the stroke ends; they are not locking mechanisms. If position holding is required, consider an external rod lock or the BSE series.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SE Cylinders

Request a Quote for Airtac SE50 Standard Cylinder SE50X40SH

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SE50X40SH and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.