
The AirTAC SE50 Standard Cylinder SE50X45SH is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 45mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE50X45SH is a double-acting single-rod ISO 15552 profile cylinder engineered for high-temperature actuation. It delivers a robust 982 N push force at 0.5 MPa and features a 45 mm stroke. Equipped with FKM (Viton) seals, this unit reliably operates in thermal environments up to 150 °C, expanding the standard -20 to +70 °C range for demanding industrial setups.
Its extruded aluminum barrel omits external tie rods, yielding a smooth, corrosion-resistant profile that mounts flush within tight machine enclosures. The integrated -S magnet directly interfaces with AirTAC CMSE reed and DMSE electronic sensors for precise end-of-stroke detection, while the field-adjustable pneumatic cushioning at both ends softens impact kinetic energy during rapid 30-800 mm/s cycles.
| Model | Airtac SE50 Standard Cylinder SE50X45SH |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 45 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×45 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Survives ambient heat near mold platens using FKM seals, applying 982 N of push force to eject formed plastic parts reliably over a short 45 mm travel.
Drives the upper sealing jaw on continuous form-fill-seal equipment, where Viton seals resist thermal degradation from adjacent sealing bars.
Handles internal mechanism positioning inside high-temperature laboratory ovens up to 150 C, utilizing the integrated magnet for DMSE electronic position feedback.
Choosing this 50 mm bore is optimal when a 40 mm cylinder (628 N push @0.5 MPa) lacks thrust, but an 80 mm bore (2513 N push @0.5 MPa) introduces excessive physical bulk. The PT1/4 port and M16x1.5 rod thread provide standardized pneumatic and mechanical interfaces for seamless ISO 15552 retrofits. Because this is a double-acting cylinder, it cannot hold a load unpowered; if your 45 mm stroke mechanism requires position holding during air loss, utilize a BSE rod lock variant. The 20 mm rod handles standard bearing loads effortlessly, though any stroke exceeding 300 mm necessitates an external guide to prevent rod bending.
AirtacDistr lists every SE50 order code with its price on one page at https://airtacdistr.com/products/airtac-se50-iso-air-cylinder
Quick checklist
At 0.5 MPa, the push force is 982 N and the pull force is 825 N. At 0.7 MPa, the push force reaches 1374 N. The maximum push force is 200 kgf at 1.0 MPa. Thanks to the H seal option (FKM/Viton), the temperature range extends from -20 to 150 C.
Yes. The SE50X45SH is dimensionally interchangeable per ISO 15552 / VDMA 24562 standards. You can drop it directly into existing mounting hardware (like FA front flanges or LB foot brackets) without modifying the machine frame, and it uses standard PT1/4 pneumatic ports.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.