
The AirTAC SE50 Standard Cylinder SE50X475 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 475mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE50X475 is a double-acting, single-rod ISO 15552 profile cylinder engineered to deliver a 982 N push force at 0.5 MPa. Its square extruded aluminum barrel omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames while protecting the bore from workshop debris.
This 50mm bore unit features a PT1/4 port, a Ø20mm piston rod, and field-adjustable pneumatic cushioning at both ends to soften end-of-stroke impacts. Because this specific SKU lacks the -S magnet code, it is not wired for internal CMSE or DMSE position sensing out of the box.
| Model | Airtac SE50 Standard Cylinder SE50X475 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 475 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×475 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Drives diverting arms on logistics conveyors, utilizing the 475mm stroke to fully clear wider sorting lanes while providing 982 N to overcome carton friction.
Actuates packaging film unwind mechanisms, where the 50mm bore's 825 N retract force maintains steady tension on shrinking web materials.
Raises and lowers pneumatic stop gates at palletizing cells, absorbing the kinetic energy of arriving loads via its dual adjustable end cushions.
This 50mm bore yields 982 N push at 0.5 MPa. If your payload is lighter, the 40mm neighbor provides 628 N push, whereas stepping up to the 63mm bore gives 1559 N for heavier demands. Since this is a standard double-acting cylinder, it cannot hold a load if air pressure drops; use an AirTAC BSE rod lock for fail-safe positioning.
With a 475mm stroke, the unsupported rod is highly susceptible to bending under lateral loads. Always pair this length with an external linear guide to prevent premature rod-bearing wear. As a dimensionally interchangeable ISO 15552 cylinder, it drops directly into existing footprints using standard LB or FA hardware, with PT1/4 ports.
AirtacDistr lists every SE50 order code with its price on one page at https://airtacdistr.com/products/airtac-se50-iso-air-cylinder
Quick checklist
At 0.5 MPa, the SE50X475 provides 982 N of push force and 825 N of pull force. At 0.7 MPa, the push force is 1374 N. The maximum push force is 200 kgf at the maximum operating pressure of 1.0 MPa.
No, the adjustable air cushion at both ends only decelerates the piston near the stroke end; it is not a locking mechanism. If your application must hold a load without live air pressure, you need a BSE series rod lock or an external pilot-operated check valve.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.