
The AirTAC SE50 Standard Cylinder SE50X490S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 490mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE50X490S is a double-acting single-rod ISO 15552 profile cylinder engineered for a 490 mm stroke. It delivers a robust 982 N push force at 0.5 MPa, making it well-suited for mid-range linear actuation tasks. The square extruded aluminum barrel omits external tie rods entirely, yielding a compact, corrosion-resistant body that mounts flush against machine frames.
Equipped with a built-in position magnet (-S), this unit directly supports AirTAC CMSE reed and DMSE electronic sensors for precise end-of-stroke detection. The field-adjustable pneumatic cushioning at both ends allows technicians to tune end-cap deceleration via a set screw, softening hard mechanical stops during high-speed cycling.
| Model | Airtac SE50 Standard Cylinder SE50X490S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 490 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×490 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Uses the 490 mm stroke and 982 N push to laterally deflect heavy wood pallets between parallel conveyor lanes without stalling.
Drives filled cardboard shipping cases smoothly into sealing machinery, relying on the adjustable cushion to prevent product crushing at end of stroke.
Lowers metal brackets into chemical treatment tanks, using the -S magnet and DMSE sensors to verify precise immersion depth.
This 50 mm bore generates 982 N of push at 0.5 MPa. If your payload is lighter, stepping down to the 40 mm bore drops the output to 628 N, saving valuable space and air volume. For heavier loads, the 63 mm bore increases the push to 1559 N. Because the stroke extends 490 mm, the 20 mm rod and internal bearing face elevated bending moments under side loads; always support the load with an external guide to prevent premature seal wear. As a true ISO 15552 profile cylinder, it serves as a direct replacement for any standard 50 mm bore, 490 mm stroke, PT1/4 ported cylinder with matching mounting accessories.
AirtacDistr lists every SE50 order code with its price on one page at https://airtacdistr.com/products/airtac-se50-iso-air-cylinder
Quick checklist
At 0.5 MPa, this 50 mm bore cylinder provides 982 N of push force and 825 N of pull force. At 0.7 MPa, the push force increases to 1374 N, with a maximum push capacity of 200 kgf at 1.0 MPa. It operates at speeds ranging from 30 to 800 mm/s.
No, the adjustable air cushion only decelerates the piston near the stroke ends and does not function as a brake. If air is lost, the piston will drift. For position holding under lost pressure, you need a BSE rod lock variant or an external pilot-operated check valve.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.