
The AirTAC SE50 Standard Cylinder SE50X50SN is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 50mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE50X50SN is a double-acting, single-rod ISO 15552 profile cylinder engineered for precise linear motion. It delivers a robust 982 N of push force at 0.5 MPa and 1374 N at 0.7 MPa, making it well-suited for mid-range industrial actuation. The extruded aluminum barrel design omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames.
This specific configuration includes a built-in magnet for CMSE and DMSE position sensing, alongside an NBR seal system optimized for standard operating temperatures. The field-adjustable air cushioning at both stroke ends allows technicians to fine-tune end-of-stroke deceleration, softening mechanical impacts during high-speed cycling without relying on fixed rubber bumpers.
| Model | Airtac SE50 Standard Cylinder SE50X50SN |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 50 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×50 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Provides the 982 N push force required to open and fold corrugated carton flaps on high-speed packaging lines, utilizing the 50 mm stroke for rapid, short-travel actuation.
Handles component diversion on modular conveyor belts, where the compact tie-rod-free profile allows flush mounting between tight roller gaps without snagging passing products.
Secures aluminum workpieces inside CNC machining centers, relying on the NBR seal for longevity and the adjustable cushion to soften the clamping impact at 50 mm stroke end.
If your application requires less force, stepping down to the 40 mm bore yields 628 N of push at 0.5 MPa, whereas stepping up to the 63 mm bore provides 1559 N for heavier loads. Because this is a double-acting cylinder, it will not hold a load if air pressure is lost or the valve is centered; a load-holding application requires a BSE rod lock variant. For a direct retrofit, match the 50 mm bore, 50 mm stroke, PT1/4 port, and mounting hardware, ensuring the -S magnet is specified if position feedback is needed.
AirtacDistr lists every SE50 order code with its price on one page at https://airtacdistr.com/products/airtac-se50-iso-air-cylinder
Quick checklist
The SE50X50SN generates 982 N push and 825 N pull at 0.5 MPa, 1374 N push at 0.7 MPa, and reaches a maximum push force of 200 kgf at 1.0 MPa operating pressure.
Yes, the SE50X50SN is dimensionally interchangeable with other ISO 15552 cylinders. You can use it as a direct replacement by matching the 50 mm bore, 50 mm stroke, PT1/4 port, and mounting interface.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.