
The AirTAC SE50 Standard Cylinder SE50X620S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 620mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE50X620S is a double-acting single-rod ISO 15552 profile cylinder engineered to deliver a 982 N push force at 0.5 MPa. Its square extruded aluminum barrel eliminates external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames while protecting internal mechanics.
Equipped with a built-in magnet (-S), this unit directly supports AirTAC CMSE reed and DMSE electronic sensors for precise end-of-stroke detection. The field-adjustable air cushioning at both ends allows technicians to fine-tune end-stop deceleration for the 620 mm travel, ensuring smooth operation across its 30-800 mm/s speed range.
| Model | Airtac SE50 Standard Cylinder SE50X620S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 620 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×620 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Drives the folding mechanism on packaging lines, utilizing the 982 N push force and 620 mm stroke to erect large corrugated cartons reliably.
Actuates diverter gates on conveyor systems, where the integrated magnet triggers DMSE sensors to confirm stroke completion for PLC logic.
Moves sample racks between testing stations, benefiting from the flush extruded profile to avoid snagging in tight enclosure spaces.
Stepping down to a 40 mm bore drops the 0.5 MPa push force to 628 N, while stepping up to a 63 mm bore increases it to 1559 N, giving you clear sizing boundaries for this 982 N class. Because the 620 mm stroke exceeds 300 mm, the Ø20 mm rod and bearing are subject to bending under heavy side loads; an external guide rail is strongly recommended to prevent premature wear.
As a dimensionally interchangeable ISO 15552 component, this cylinder serves as a direct replacement sharing standard mounting hardware. Note that the adjustable cushion only decelerates the piston near stroke end; if your process must hold a load without live air pressure, integrate a BSE rod lock or external check valve.
AirtacDistr lists every SE50 order code with its price on one page at https://airtacdistr.com/products/airtac-se50-iso-air-cylinder
Quick checklist
The SE50X620S provides a push force of 982 N and a pull force of 825 N at 0.5 MPa. At 0.7 MPa, the push force is 1374 N, with a maximum push of 200 kgf at 1.0 MPa. It uses a PT1/4 port and a Ø20 mm rod with an M16x1.5 thread.
Yes, the SE50X620S is dimensionally interchangeable per ISO 15552 standards, meaning it shares the exact mounting footprint and hardware of other ISO 15552 profile cylinders for direct retrofits.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.