
The AirTAC SE50 Standard Cylinder SE50X75STC is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 75mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE50X75STC is a double-acting, single-rod ISO 15552 profile cylinder engineered to deliver 982 N of push force at 0.5 MPa and 1374 N at 0.7 MPa. It features a square extruded aluminum barrel without external tie rods, creating a compact, corrosion-resistant body that mounts flush on machinery.
This specific configuration includes a TC centre trunnion mounting bracket and a built-in magnetic piston for AirTAC CMSE reed and DMSE electronic position sensors. The field-adjustable pneumatic cushioning at both ends allows you to tune end-of-stroke deceleration, softening hard impacts during rapid 30-800 mm/s cycling.
| Model | Airtac SE50 Standard Cylinder SE50X75STC |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 75 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Provides the 982 N push stroke required to mechanically fold corrugated cardboard flaps on high-speed packaging lines, utilizing the 75 mm stroke for rapid, short-travel actuation.
Pivots via the TC trunnion mount to actuate routing gates on package conveyor systems, handling the side-load of deflecting moving boxes with precise 75 mm displacement.
Drives the sliding safety enclosure on a CNC lathe, using the integrated -S magnet with DMSE sensors to confirm door closure before machining cycles initiate.
This 50 mm bore generates 982 N push at 0.5 MPa. If your payload is lighter, you can step down to the 40 mm bore for 628 N, or step up to the 63 mm bore for 1559 N if you need greater thrust. The TC trunnion pivot is ideal for mid-supported loads, but remember that a plain double-acting cylinder drifts when air is lost; use a BSE rod lock if the application must hold a vertical load without live pressure.
AirtacDistr lists every SE50 order code with its price on one page at https://airtacdistr.com/products/airtac-se50-iso-air-cylinder
Quick checklist
At 0.5 MPa, the 50 mm bore provides 982 N of push force and 825 N of pull force. At 0.7 MPa, push increases to 1374 N, with a maximum push rating of 200 kgf at 1.0 MPa. The rod end thread is M16x1.5 and the air port is PT1/4.
Yes. The SE50X75STC is dimensionally interchangeable per ISO 15552 / VDMA 24562 standards. Its standardized mounting footprint and PT1/4 porting allow it to serve as a direct replacement for other ISO 15552 profile cylinders, sharing standard TC mounting hardware.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.