Airtac SE63 Standard Cylinder SE63AX1000S
The AirTAC SE63 Standard Cylinder SE63AX1000S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 1000mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ63 mm
- Stroke1000 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SE63 Standard Cylinder SE63AX1000S
The AirTAC SE63AX1000S is a double-acting single-rod ISO 15552 profile cylinder engineered for a 1000 mm stroke. It delivers a robust 1559 N push at 0.5 MPa, utilizing a 20 mm rod and PT3/8 ports. Equipped with a SUS420J2 stainless steel rod (code A), it is purpose-built for corrosive environments and washdown duty where standard carbon steel would fail.
This extruded aluminum body omits external tie rods, yielding a compact footprint that mounts flush against machine frames while resisting corrosion. The integrated magnet (-S) directly supports AirTAC CMSE reed and DMSE electronic position sensors. Because the cushioning is field-adjustable at both ends via set screws, you can precisely tune the end-of-stroke deceleration to protect tooling over this long 1000 mm travel.
Airtac SE63 Standard Cylinder SE63AX1000S Technical Specifications
| Model | Airtac SE63 Standard Cylinder SE63AX1000S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 1000 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE63 Standard Cylinder SE63AX1000S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×1000 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE63 Standard Cylinder SE63AX1000S Is Used
Washdown Diverters
Drives routing gates on food-grade conveyors, utilizing the SUS420J2 rod to withstand high-pressure cleaning chemicals without pitting.
Long-Stroke Palletizers
Lifts empty pallets over a 1000 mm vertical span, relying on the 1559 N push force to elevate the load smoothly into the loading zone.
Chemical Dip Tanks
Raises and lowers part racks into corrosive treatment baths, where the stainless steel rod ensures reliable operation amid harsh vapors.
Is the Airtac SE63 Standard Cylinder SE63AX1000S the Right Cylinder?
Selecting this 63 mm bore yields 1559 N push at 0.5 MPa. If your load is lighter, the 50 mm bore offers 982 N push, while stepping up to the 80 mm bore provides 2513 N push for heavier dynamics. This model features a PT3/8 port, a 1000 mm stroke, and a -S magnet for CMSE or DMSE switches. It is dimensionally interchangeable with other ISO 15552 cylinders, providing a direct retrofit using existing mounting hardware.
Because this cylinder features a 1000 mm stroke, the extended 20 mm rod is subject to bending forces under side loads. An external guide mechanism is highly recommended to prevent rod-bearing wear. Furthermore, the adjustable air cushion only decelerates the piston near stroke end; it is not a locking device. If your application must hold a vertical load without live air pressure, pair this cylinder with an external rod lock or a BSE series variant.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE63 Standard Cylinder SE63AX1000S FAQ
At 0.5 MPa, this 63 mm bore cylinder provides 1559 N of push force and 1402 N of pull force. At 0.7 MPa, the push force increases to 2182 N. The maximum push capacity is 318 kgf at 1.0 MPa, and the operational speed range is 30-800 mm/s.
Yes. The SE63AX1000S shares the standardized ISO 15552 / VDMA 24562 mounting interface, meaning it is dimensionally interchangeable with other ISO 15552 profile cylinders. You can drop it into existing mounts using the same bore and stroke dimensions.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE63 Standard Cylinder SE63AX1000S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.