Airtac SE63 Standard Cylinder SE63AX105
The AirTAC SE63 Standard Cylinder SE63AX105 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 105mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ63 mm
- Stroke105 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SE63 Standard Cylinder SE63AX105
The AirTAC SE63AX105 is a double-acting, single-rod ISO 15552 profile cylinder engineered for a 63 mm bore and 105 mm stroke. It delivers a robust 1559 N push force at 0.5 MPa and a 1402 N pull force, making it highly effective for mid-range industrial actuation. Equipped with a SUS420J2 stainless steel rod (option A), this specific SKU is purpose-built to withstand corrosive environments and rigorous washdown procedures without compromising operational integrity.
Unlike traditional tie-rod designs, the SE series features a square extruded aluminum barrel that mounts flush while exposing sensor grooves on three sides for flexible positioning. The barrel houses field-adjustable air cushions at both ends, allowing technicians to dial in the exact deceleration required to prevent hard end-stop impacts at operating speeds up to 800 mm/s. Note that this configuration ships without a built-in magnet, meaning it is not ready out-of-the-box for CMSE or DMSE electronic position sensing without modification.
Airtac SE63 Standard Cylinder SE63AX105 Technical Specifications
| Model | Airtac SE63 Standard Cylinder SE63AX105 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 105 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE63 Standard Cylinder SE63AX105
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×105 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE63 Standard Cylinder SE63AX105 Is Used
Flow Wrapper Film Sealing
Drives the sealing jaw on a continuous flow wrapper with 1559 N of extend force, utilizing the SUS420J2 rod to endure daily washdowns in food packaging lines.
Pallet Transfer Gate
Actuates a 105 mm stroke diverter gate on a packaging conveyor, using the field-adjustable air cushions to soften stops and protect high-speed pallet transfers.
Bottling Line Diverter
Pushes rinse path diverters in a beverage bottling plant, where the stainless steel rod material prevents corrosion from chemical cleaning agents.
Is the Airtac SE63 Standard Cylinder SE63AX105 the Right Cylinder?
When sizing this 63 mm bore cylinder, evaluate your force margins carefully: stepping down to a 50 mm bore reduces your 0.5 MPa push force to 982 N, while stepping up to an 80 mm bore increases it to 2513 N. If your application requires pneumatic position feedback, you would need the -S magnet option on your order to utilize AirTAC CMSE or DMSE switches. Because the standard SE cylinder lacks a mechanical lock, it cannot hold a load vertically if air pressure is lost or exhausted; for fail-safe holding, consider the BSE rod-lock variant. Furthermore, while the 20 mm rod and M16x1.5 thread handle high side loads, any stroke exceeding 300 mm should incorporate an external guide bearing to prevent rod-bearing bending.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE63 Standard Cylinder SE63AX105 FAQ
The SE63AX105 provides a push force of 1559 N and a pull force of 1402 N at 0.5 MPa. At 0.7 MPa, the push force reaches 2182 N, with a maximum push capacity of 318 kgf at 1.0 MPa. It operates at speeds between 30 and 800 mm/s.
Yes, the SE63AX105 is dimensionally interchangeable per ISO 15552 / VDMA 24562 standards, meaning it shares the exact mounting footprint and port dimensions (PT3/8) of other ISO 15552 profile cylinders for seamless retrofits.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE63 Standard Cylinder SE63AX105
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.