Airtac SE63 Standard Cylinder SE63AX130
The AirTAC SE63 Standard Cylinder SE63AX130 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 130mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ63 mm
- Stroke130 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SE63 Standard Cylinder SE63AX130
The AirTAC SE63AX130 is a double-acting, single-rod ISO 15552 profile cylinder with a 63 mm bore and 130 mm stroke. It delivers a robust 1559 N push force at 0.5 MPa and features a SUS420J2 stainless steel rod (code A) for superior corrosion resistance in washdown or mildly corrosive settings.
The extruded aluminum barrel eliminates external tie rods, yielding a compact, flush-mounting body that resists dirt traps. Adjustable pneumatic cushioning at both ends lets you tune end-of-stroke deceleration to soften hard impacts. Note this SKU lacks a built-in magnet, so it cannot host CMSE or DMSE position sensors without modification.
Airtac SE63 Standard Cylinder SE63AX130 Technical Specifications
| Model | Airtac SE63 Standard Cylinder SE63AX130 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 130 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE63 Standard Cylinder SE63AX130
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×130 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE63 Standard Cylinder SE63AX130 Is Used
Stainless Steel Food Conveyor Diverter
Uses the 1559 N push force and SUS420J2 rod to reliably deflect washed cartons on a packaging line without rusting in humid environments.
CNC Lathe Chuck Guard Actuator
Moves a safety door with the 130 mm stroke, relying on adjustable end cushions to prevent mechanical shock during rapid cycling.
Pharmaceutical Mixer Lid Lift
Raises a vessel cover where the square no-tie-rod profile prevents contaminant buildup and allows easy external cleaning.
Is the Airtac SE63 Standard Cylinder SE63AX130 the Right Cylinder?
This 63 mm bore gives 1559 N push at 0.5 MPa. If your task needs less force, the 50 mm bore yields 982 N push; if you need more clamping power, step up to the 80 mm bore providing 2513 N push. Being a standard double-acting cylinder, it will drift and cannot hold a load if air pressure drops—use a BSE rod lock for fail-safe positioning. With its 130 mm stroke, side load is minimal, but always verify the rod-end thread M16x1.5 matches your mechanical linkage. It serves as a direct dimensional replacement for any ISO 15552 cylinder.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE63 Standard Cylinder SE63AX130 FAQ
At 0.5 MPa it provides 1559 N push and 1402 N pull; at 0.7 MPa push is 2182 N, with a maximum push of 318 kgf at 1.0 MPa. It uses a PT3/8 port and an M16x1.5 rod-end thread.
Yes, it is dimensionally interchangeable per ISO 15552 / VDMA 24562 standards, meaning it shares the exact same mounting and footprint dimensions for direct retrofitting. Just ensure your mounting hardware matches.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE63 Standard Cylinder SE63AX130
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.