Airtac SE63 Standard Cylinder SE63AX170
The AirTAC SE63 Standard Cylinder SE63AX170 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 170mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ63 mm
- Stroke170 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SE63 Standard Cylinder SE63AX170
The AirTAC SE63AX170 is a double-acting single-rod ISO 15552 profile cylinder engineered for a 63 mm bore and 170 mm stroke. It generates 1559 N of push force at 0.5 MPa, utilizing a hard-chrome plated SUS420J2 stainless steel rod to endure corrosive and washdown environments. The extruded aluminum barrel omits external tie rods, yielding a compact footprint that mounts flush against machine frames.
This model features field-adjustable air cushioning at both ends to decelerate the piston smoothly near stroke limits, preventing harsh end-stop impacts. Because this SKU lacks the -S magnet suffix, it is not equipped for CMSE or DMSE electronic position sensing out of the box. Operating at speeds of 30-800 mm/s, it integrates seamlessly into existing setups via its PT3/8 port and standardized ISO 15552 mounting dimensions.
Airtac SE63 Standard Cylinder SE63AX170 Technical Specifications
| Model | Airtac SE63 Standard Cylinder SE63AX170 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 170 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE63 Standard Cylinder SE63AX170
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×170 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE63 Standard Cylinder SE63AX170 Is Used
Bottling Line Diverters
Actuates routing gates on beverage filling lines, where the SUS420J2 stainless rod withstands daily washdowns and the 1559 N push force easily pivots full bottle guides.
Corrugated Box Flap Folders
Drives the mechanical arms that fold heavy cardboard box flaps at 170 mm stroke, relying on adjustable end cushions to soften the impact during high-speed cycling.
Pallet Stopper Arms
Extends a 63 mm bore stopper block to halt loaded pallets on a conveyor, using its 1402 N pull force to retract the arm cleanly out of the transport path.
Is the Airtac SE63 Standard Cylinder SE63AX170 the Right Cylinder?
Selecting the SE63AX170 is appropriate when your application requires approximately 1559 N of push force at 0.5 MPa. If you need less force, the 50 mm bore offers 982 N of push; if your load demands more power, stepping up to the 80 mm bore provides 2513 N. This cylinder uses a PT3/8 port and accepts standard ISO 15552 mounting accessories like FA front flanges or TC centre trunnions. Keep in mind that a plain double-acting cylinder drifts when air pressure is lost or the valve is centered, so it cannot hold a vertical load safely without an external rod lock or pilot-operated check valve. For stroke lengths of 170 mm, the 20 mm rod and M16x1.5 thread handle moderate side loads adequately, though any extended unsupported stroke beyond 300 mm would require an external guide to prevent rod-bearing bending.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE63 Standard Cylinder SE63AX170 FAQ
The 63 mm bore generates 1559 N push and 1402 N pull at 0.5 MPa, 2182 N push at 0.7 MPa, and a maximum push of 318 kgf at 1.0 MPa. It uses a 20 mm SUS420J2 stainless steel rod with an M16x1.5 thread.
Yes, the extruded profile barrel is dimensionally interchangeable with other ISO 15552 cylinders, allowing you to reuse existing mounting hardware. This specific SKU lacks the -S magnet, so it cannot host CMSE or DMSE position sensors without modifying the piston assembly.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE63 Standard Cylinder SE63AX170
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.