Airtac SE63 Standard Cylinder SE63AX190S
The AirTAC SE63 Standard Cylinder SE63AX190S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 190mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ63 mm
- Stroke190 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SE63 Standard Cylinder SE63AX190S
The AirTAC SE63AX190S is a double-acting single-rod profile cylinder built to the ISO 15552 standard. It delivers a robust 1559 N push force at 0.5 MPa, making it well-suited for mid-range industrial actuation. The square extruded aluminum barrel eliminates external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames.
This specific configuration features a SUS420J2 stainless steel piston rod for corrosive or washdown environments, along with a built-in magnet for CMSE and DMSE position sensing. Field-adjustable air cushions at both ends allow you to tune end-of-stroke deceleration, preventing hard impacts during high-speed cycling.
Airtac SE63 Standard Cylinder SE63AX190S Technical Specifications
| Model | Airtac SE63 Standard Cylinder SE63AX190S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 190 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE63 Standard Cylinder SE63AX190S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×190 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE63 Standard Cylinder SE63AX190S Is Used
Flow Wrapper End-Seal Jaw
Drives the 190 mm stroke to close sealing jaws on continuous flow wrappers, utilizing the 1559 N push force to crimp packaging film securely.
CNC Lathe Bar Feeder
Actuates pusher stock through the spindle, relying on the SUS420J2 stainless rod to resist coolant mist and washdown splatter.
Pallet Dispenser Magazine
Lifts empty pallets from a magazine stack, using the built-in magnet to trigger DMSE sensors for empty-stack confirmation.
Is the Airtac SE63 Standard Cylinder SE63AX190S the Right Cylinder?
Generating 1559 N of push at 0.5 MPa, this 63 mm bore fits medium-duty tasks. If your load is lighter, stepping down to the 50 mm bore yields 982 N of push, saving space and air volume. For heavier demands, the 80 mm bore provides 2513 N. Because this is a 190 mm stroke, evaluate side loads; an external guide is recommended to prevent rod-bearing bending over extended unsupported travel. Remember, a standard SE cylinder does not hold a load if air pressure drops; for position holding, consider the BSE rod lock variant. As a dimensionally interchangeable ISO 15552 cylinder, it serves as a direct replacement sharing standard mounting and PT3/8 port dimensions.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE63 Standard Cylinder SE63AX190S FAQ
The SE63AX190S generates 1559 N of push force and 1402 N of pull force at 0.5 MPa. At 0.7 MPa, the push force is 2182 N, with a maximum push capacity of 318 kgf at 1.0 MPa. The pneumatic port size is PT3/8.
Yes, it is dimensionally interchangeable with other ISO 15552 profile cylinders, allowing you to reuse existing mounting hardware. However, the adjustable air cushion only decelerates the piston near stroke end; it does not lock or hold a load. If air is lost, the rod will drift, so a BSE rod lock is needed for secure holding.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE63 Standard Cylinder SE63AX190S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.