Airtac SE63 Standard Cylinder SE63AX210S
The AirTAC SE63 Standard Cylinder SE63AX210S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 210mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ63 mm
- Stroke210 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SE63 Standard Cylinder SE63AX210S
The AirTAC SE63AX210S is a double-acting single-rod ISO 15552 profile cylinder engineered for a 63 mm bore and a 210 mm non-standard stroke. It delivers a robust 1559 N push force at 0.5 MPa, making it highly capable for mid-range industrial actuation. The extruded aluminum barrel omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames while resisting mechanical snagging in tight cells.
This specific configuration features a SUS420J2 stainless steel rod (code A) for enhanced durability in corrosive or washdown environments. A built-in magnet (code S) enables seamless position detection with AirTAC CMSE reed or DMSE electronic sensors. Furthermore, the field-adjustable air cushioning at both ends allows technicians to precisely tune end-of-stroke deceleration via a set screw, softening hard impacts during high-speed cycling.
Airtac SE63 Standard Cylinder SE63AX210S Technical Specifications
| Model | Airtac SE63 Standard Cylinder SE63AX210S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 210 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE63 Standard Cylinder SE63AX210S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×210 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE63 Standard Cylinder SE63AX210S Is Used
Vertical Pouch Sealing
Provides the 1559 N push at 0.5 MPa required to securely crimp and seal heavy-duty laminated food pouches during continuous packaging line operation.
Metal Stamping Press
Exerts controlled clamping force on sheet metal blanks within a progressive die station, utilizing the 36 mm adjustable cushion to prevent end-stop shock.
Bottling Line Diverter
Actuates routing gates on a beverage filling conveyor, where the SUS420J2 stainless steel rod withstands frequent washdowns and chemical cleaning.
Is the Airtac SE63 Standard Cylinder SE63AX210S the Right Cylinder?
When sizing this actuator, consider stepping down to the 50 mm bore (982 N push at 0.5 MPa) for lighter loads, or up to the 80 mm bore (2513 N push at 0.5 MPa) if your application demands greater thrust. Because this is a standard double-acting cylinder, it will not hold a load if air pressure is lost or the valve is centered; the piston will drift. For position-holding requirements, pair this cylinder with an external pilot-operated check valve or explore the AirTAC BSE rod-lock variant. As a true ISO 15552 profile cylinder, it serves as a direct dimensional replacement for other ISO 15552 cylinders, utilizing standard PT3/8 ports and shared mounting accessories. Finally, because the 210 mm stroke exceeds the standard 1500 mm maximum for this bore, it is manufactured as a made-to-order unit.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE63 Standard Cylinder SE63AX210S FAQ
This 63 mm bore cylinder generates 1559 N of push force and 1402 N of pull force at 0.5 MPa. At 0.7 MPa, the push force is 2182 N, and it reaches a maximum push of 318 kgf at 1.0 MPa. It operates at speeds of 30-800 mm/s and features a PT3/8 port.
Yes, the SE63AX210S is dimensionally interchangeable per ISO 15552 standards. You can drop it in as a replacement for other ISO 15552 profile cylinders using your existing mounting hardware and PT port connections.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE63 Standard Cylinder SE63AX210S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.