
The AirTAC SE63 Standard Cylinder SE63AX240S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 240mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63AX240S is a double-acting, single-rod ISO 15552 profile cylinder engineered to deliver 1559 N of push force at 0.5 MPa. It features a 63 mm bore, a 240 mm stroke, and a Ø20 mm piston rod machined from SUS420J2 stainless steel, making it highly suitable for corrosive or washdown environments. The extruded aluminum barrel design omits external tie rods entirely, yielding a compact, flush-mounting body that resists debris accumulation.
Equipped with a built-in magnet (code S), this unit seamlessly interfaces with AirTAC CMSE reed and DMSE electronic sensors for precise end-of-stroke detection. The field-adjustable pneumatic cushioning at both ends allows technicians to dial in end-stop deceleration for fast 30-800 mm/s cycling, protecting both the machinery and the 318 kgf maximum load capacity.
| Model | Airtac SE63 Standard Cylinder SE63AX240S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 240 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×240 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Provides the exact 1559 N at 0.5 MPa needed to clamp and seal heavy-duty foil pouches, while the SUS420J2 stainless rod withstands daily chemical washdowns.
Utilizes the 240 mm stroke to push heavy glass bottle flats between conveyor lanes, relying on the built-in magnet and DMSE sensors for high-speed 30-800 mm/s tracking.
Mounts flush to a machining center to sweep metal shavings across a 240 mm bed, benefiting from the tie-rod-free extruded profile that prevents swarf packing.
This 63 mm bore generates 1559 N push at 0.5 MPa, sitting perfectly between the 50 mm bore (982 N push) and the 80 mm bore (2513 N push) for mid-tier actuation needs. If your assembly requires less force and a smaller footprint, step down to the 50 mm option; if you are moving heavier pallets or overcoming high friction, step up to the 80 mm model. Remember that a standard SE cylinder does not hold its position when air is exhausted—if your application requires fail-safe load holding, consider the BSE rod-lock variant instead.
At 240 mm of stroke, the unsupported piston rod is susceptible to bending under side loads. To prevent premature rod-bearing wear, use an external guide rail to support the load. For direct retrofits, this cylinder is dimensionally interchangeable per ISO 15552, sharing standard mounting interface dimensions and a PT3/8 port with equivalent profile cylinders.
Quick checklist
At 0.5 MPa, this 63 mm bore cylinder provides 1559 N of push force and 1402 N of pull force. At 0.7 MPa, push force increases to 2182 N, with a maximum push capacity of 318 kgf at 1.0 MPa. It operates at speeds ranging from 30 to 800 mm/s.
No, the adjustable air cushion at both ends only decelerates the piston near the stroke end and does not act as a brake or lock. If you need to hold a load vertically without live air pressure, you must use an external rod lock or the AirTAC BSE variant.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.