Airtac SE63 Standard Cylinder SE63AX500S
The AirTAC SE63 Standard Cylinder SE63AX500S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 500mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ63 mm
- Stroke500 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SE63 Standard Cylinder SE63AX500S
The AirTAC SE63AX500S is a double-acting, single-rod ISO 15552 profile cylinder engineered for rigorous linear motion tasks. It delivers a robust 1559 N push force at 0.5 MPa, utilizing a 63 mm bore and a 500 mm stroke. This configuration integrates a SUS420J2 stainless steel rod (option A) paired with a built-in magnet (option S), making it highly suitable for environments demanding enhanced corrosion resistance and precise position detection.
Unlike traditional tie-rod designs, its extruded aluminum barrel offers a smooth, compact profile that is easy to mount flush while resisting external corrosion. The cylinder features field-adjustable pneumatic cushioning at both ends, allowing technicians to fine-tune the end-of-stroke deceleration via a set screw—softening hard impacts without relying on fixed rubber bumpers. Furthermore, the integrated magnet enables seamless operation with AirTAC CMSE reed and DMSE electronic sensors.
Airtac SE63 Standard Cylinder SE63AX500S Technical Specifications
| Model | Airtac SE63 Standard Cylinder SE63AX500S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 500 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE63 Standard Cylinder SE63AX500S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×500 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE63 Standard Cylinder SE63AX500S Is Used
Stainless Steel Pallet Wrapper
Drives the film carriage and sealing head on stretch wrappers, utilizing the 1559 N push force and SUS420J2 rod to withstand washdown cycles.
Bottling Line Diverter
Actuates lane changing gates at 30-800 mm/s, relying on the 500 mm stroke and CMSE/DMSE magnet sensors for high-speed package routing.
Pharmaceutical Skid Frame
Positions process valves on stainless steel skids where the SUS420J2 rod prevents corrosion, and the ISO 15552 profile simplifies hygienic mounting.
Is the Airtac SE63 Standard Cylinder SE63AX500S the Right Cylinder?
When sizing this actuator, consider stepping down to the 50 mm bore (delivering 982 N push at 0.5 MPa) for lighter loads, or upgrading to the 80 mm bore (providing 2513 N push at 0.5 MPa) for higher force demands. As a standard ISO 15552 cylinder, it serves as a direct dimensional replacement for other profile cylinders in the same footprint, utilizing a PT3/8 port and M16x1.5 rod thread. Because the 500 mm stroke creates a long unsupported rod length, it is highly recommended to use an external guide to prevent rod-bearing bending under side loads. Note that the adjustable air cushion only decelerates the piston near the stroke ends; it does not hold a load if air pressure is lost.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE63 Standard Cylinder SE63AX500S FAQ
The SE63AX500S generates 1559 N push and 1402 N pull at 0.5 MPa, 2182 N push at 0.7 MPa, and a maximum of 318 kgf at 1.0 MPa. It operates at speeds ranging from 30-800 mm/s.
Yes, the SE63AX500S is dimensionally interchangeable per ISO 15552 standards. It uses standard mounting hardware and features a built-in magnet compatible with AirTAC CMSE and DMSE sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE63 Standard Cylinder SE63AX500S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.