Airtac SE63 Standard Cylinder SE63AX600S
The AirTAC SE63 Standard Cylinder SE63AX600S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 600mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ63 mm
- Stroke600 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SE63 Standard Cylinder SE63AX600S
The AirTAC SE63AX600S is a double-acting single-rod profile cylinder built to the ISO 15552 standard, delivering a push force of 1559 N at 0.5 MPa. It features a 63 mm bore and a 600 mm stroke, utilizing a PT3/8 port and a 20 mm piston rod with an M16x1.5 thread. The square extruded aluminum barrel omits external tie rods, yielding a compact footprint that mounts flush and resists corrosion.
This specific configuration includes a SUS420J2 stainless steel rod (code A) for corrosive or washdown environments, alongside a built-in magnet (code S) for position sensing. The integrated magnet interfaces directly with AirTAC CMSE reed and DMSE electronic switches fitted into the sensor grooves. Furthermore, field-adjustable air cushions at both ends allow technicians to tune end-of-stroke deceleration, softening hard impacts during high-speed cycling.
Airtac SE63 Standard Cylinder SE63AX600S Technical Specifications
| Model | Airtac SE63 Standard Cylinder SE63AX600S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 600 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE63 Standard Cylinder SE63AX600S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×600 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE63 Standard Cylinder SE63AX600S Is Used
Bottling Line Diverter
Actuates routing gates on a beverage bottling line, using the 1559 N push force to deflect heavy crate traffic while the SUS420J2 rod resists daily washdown moisture.
Corrugated Box Flap Folder
Drives a 600 mm stroke folding arm to seal large corrugated cartons, relying on the adjustable pneumatic cushion to soften the end stop during rapid 30-800 mm/s cycling.
Lab Washdown Ejector
Pushes processed sample trays out of a sterile enclosure, where the -S magnet triggers DMSE electronic sensors to confirm full extension under damp conditions.
Is the Airtac SE63 Standard Cylinder SE63AX600S the Right Cylinder?
Selecting the SE63AX600S provides 1559 N of push force at 0.5 MPa. If your application requires less force, stepping down to the 50 mm bore yields 982 N of push, while moving up to the 80 mm bore provides 2513 N, allowing you to scale precisely. As a standard ISO 15552 profile cylinder, it serves as a direct replacement for other ISO 15552 cylinders, sharing identical mounting dimensions and PT3/8 port sizing.
Because this unit features a 600 mm stroke, the extended rod is susceptible to bending under heavy lateral loads; an external guide mechanism is recommended to prevent rod-bearing wear. Note that the adjustable air cushion only decelerates the piston near stroke end and does not lock the load. If air pressure is lost, the cylinder will drift, requiring a BSE rod lock or external pilot-operated check valve for secure position holding.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE63 Standard Cylinder SE63AX600S FAQ
The 63 mm bore generates a push force of 1559 N and a pull force of 1402 N at 0.5 MPa. At 0.7 MPa, the push force is 2182 N, with a maximum push capacity of 318 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes, it is dimensionally interchangeable per ISO 15552, matching standard mounting interfaces and PT3/8 ports. However, it cannot hold a load unpowered; the adjustable air cushion only decelerates the piston near stroke end and is not a brake. A BSE rod lock is needed for position holding.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE63 Standard Cylinder SE63AX600S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.