Airtac SE63 Standard Cylinder SE63AX750S
The AirTAC SE63 Standard Cylinder SE63AX750S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 750mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ63 mm
- Stroke750 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SE63 Standard Cylinder SE63AX750S
The AirTAC SE63AX750S is a double-acting, single-rod ISO 15552 profile cylinder engineered for demanding linear motion tasks. It generates 1559 N of push force at 0.5 MPa and features a generous 750 mm stroke. The extruded aluminum barrel design omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames while retaining the standardized ISO 15552 interface.
This specific configuration integrates a SUS420J2 stainless steel rod for enhanced corrosion and washdown resistance, paired with a built-in magnet for CMSE and DMSE electronic position sensing. The field-adjustable pneumatic cushioning at both ends allows technicians to tune end-of-stroke deceleration via a screw, softening hard mechanical impacts during high-speed 30-800 mm/s cycling.
Airtac SE63 Standard Cylinder SE63AX750S Technical Specifications
| Model | Airtac SE63 Standard Cylinder SE63AX750S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 750 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE63 Standard Cylinder SE63AX750S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×750 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE63 Standard Cylinder SE63AX750S Is Used
Corrugated Box Forming
Drives the folding mechanism on high-speed packaging lines, utilizing the 750 mm stroke and SUS420J2 rod to withstand dusty, occasionally humid warehouse environments.
Pallet Pusher Assembly
Transfers heavy product pallets between adjacent roller conveyors, relying on the 1559 N push force to overcome initial friction and reposition loads smoothly.
Lab Coating Dispenser
Actuates a washdown fluid dispensing head across a wide processing bed, where the stainless steel rod prevents corrosion from chemical exposure.
Is the Airtac SE63 Standard Cylinder SE63AX750S the Right Cylinder?
When sizing this actuator, compare its 1559 N push at 0.5 MPa against adjacent bores: stepping down to a 50 mm bore yields 982 N, while stepping up to an 80 mm bore provides 2513 N. Because the 750 mm stroke creates a long unsupported rod extension, an external guide is strongly recommended to prevent rod-bearing bending under side loads. As a standard ISO 15552 profile cylinder, it serves as a direct dimensional replacement for similar bore and stroke units, utilizing the PT3/8 port and standard mounting accessories. Note that the adjustable air cushion only decelerates the piston near stroke end; it does not hold a load if air pressure is lost.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE63 Standard Cylinder SE63AX750S FAQ
The SE63AX750S generates 1559 N of push force and 1402 N of pull force at 0.5 MPa. At 0.7 MPa, the push force is 2182 N, and the maximum push force is 318 kgf at 1.0 MPa.
Yes, the SE63AX750S is dimensionally interchangeable per ISO 15552 mounting dimensions, allowing it to serve as a direct replacement for other standard profile cylinders using the same PT3/8 port and bore size.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE63 Standard Cylinder SE63AX750S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.