Airtac SE63 Standard Cylinder SE63AX80
The AirTAC SE63 Standard Cylinder SE63AX80 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 80mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ63 mm
- Stroke80 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SE63 Standard Cylinder SE63AX80
The AirTAC SE63AX80 is a double-acting single-rod profile cylinder built to the ISO 15552 standard, delivering 1559 N of push force at 0.5 MPa. It features a 63 mm bore and an 80 mm stroke, making it a robust mid-range actuator. Because this SKU uses the A code rod material, it is equipped with a SUS420J2 stainless steel piston rod designed specifically for corrosive or washdown environments.
The extruded aluminum barrel has a square profile without external tie rods, keeping the body compact and flush-mountable while resisting corrosion. Integrated sensor grooves on three sides of the body allow flexible placement of position switches, though this specific unit ships without a magnet, so it cannot host CMSE or DMSE sensors without modification. Field-adjustable air cushions at both ends let you tune end-of-stroke deceleration to protect payloads.
Airtac SE63 Standard Cylinder SE63AX80 Technical Specifications
| Model | Airtac SE63 Standard Cylinder SE63AX80 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 80 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE63 Standard Cylinder SE63AX80
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE63 Standard Cylinder SE63AX80 Is Used
Food Packaging Ejector
Uses the 1559 N push force to eject filled food containers from a stainless steel conveyor during washdown cycles.
Lab Sample Dispenser
Moves fluid vials precisely across an 80 mm stroke in high-humidity pharmaceutical laboratories without rod degradation.
Bottling Line Diverter
Actuates a gate arm to route glass bottles on a packaging line, benefiting from the SUS420J2 rod in caustic clean-in-place zones.
Is the Airtac SE63 Standard Cylinder SE63AX80 the Right Cylinder?
If you need to step down from this 63 mm bore, the 50 mm frame provides 982 N of push at 0.5 MPa; if you need more power, the 80 mm bore offers 2513 N. This SE63AX80 is dimensionally interchangeable per ISO 15552, meaning it serves as a direct replacement for other ISO 15552 cylinders using the same PT3/8 port and mounting hardware. Remember that a standard SE cylinder relies on live air pressure to hold a load—if air is lost, the piston drifts, so use a BSE rod lock for fail-safe holding. At 80 mm stroke, side-load stress on the rod bearing is minimal, but always verify load alignment.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE63 Standard Cylinder SE63AX80 FAQ
The SE63AX80 delivers 1559 N push and 1402 N pull at 0.5 MPa, 2182 N push at 0.7 MPa, and a maximum push of 318 kgf at 1.0 MPa. It features a 63 mm bore, 80 mm stroke, PT3/8 port, M16x1.5 rod thread, and operates at 30-800 mm/s.
Yes, the SE63AX80 is dimensionally interchangeable per ISO 15552, serving as a direct replacement for other ISO 15552 cylinders. It shares the standardized mounting interface and PT3/8 port size, though its SUS420J2 stainless rod is specifically tailored for washdown durability.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE63 Standard Cylinder SE63AX80
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.