Airtac SE63 Standard Cylinder SE63AX95S
The AirTAC SE63 Standard Cylinder SE63AX95S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 95mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ63 mm
- Stroke95 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SE63 Standard Cylinder SE63AX95S
The AirTAC SE63AX95S is a double-acting single-rod ISO 15552 profile cylinder engineered for rigorous automation tasks. Operating at 0.5 MPa, it generates 1559 N of push force and 1402 N of pull force, scaling up to 2182 N push at 0.7 MPa. This specific configuration features a 63 mm bore, a 95 mm stroke, and a PT3/8 port. The SUS420J2 stainless steel rod (code A) equips it for corrosive environments and washdown duty without compromising mechanical strength.
Built with an extruded aluminum square barrel, this profile cylinder eliminates external tie rods to provide a compact, flush-mounting footprint that naturally resists corrosion. The integrated magnet (code S) enables precise end-of-stroke detection using AirTAC CMSE reed or DMSE electronic sensors housed within the body's three sensor grooves. Furthermore, the field-adjustable pneumatic cushioning at both ends allows technicians to tune end-cap deceleration via a set screw, softening hard impacts during high-speed 30-800 mm/s cycling.
Airtac SE63 Standard Cylinder SE63AX95S Technical Specifications
| Model | Airtac SE63 Standard Cylinder SE63AX95S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 95 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE63 Standard Cylinder SE63AX95S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×95 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE63 Standard Cylinder SE63AX95S Is Used
Stainless Steel Pallet Diverters
Utilizes the 1559 N push force and SUS420J2 rod to reliably push heavy food-grade pallets onto secondary packaging lines during washdown shifts.
Bottling Line Lane Gates
Employs the 95 mm stroke and CMSE magnet sensors to actuate stainless lane guide gates, routing glass bottles at speeds up to 800 mm/s.
CNC Fixture Clamping
Leverages the adjustable pneumatic cushioning to decelerate the 20 mm rod smoothly, preventing shock damage when clamping aluminum castings.
Is the Airtac SE63 Standard Cylinder SE63AX95S the Right Cylinder?
Selecting the SE63AX95S is optimal when your application requires roughly 1559 N of push force at 0.5 MPa. If your load is lighter, stepping down to the 50 mm bore yields 982 N of push, conserving air volume. Conversely, if you need substantially more thrust, stepping up to the 80 mm bore provides 2513 N. Because this is a standard 95 mm stroke, it drops directly into any ISO 15552 mounting interface using basic or FA front flange hardware, requiring no custom machining.
As a double-acting pneumatic actuator, this cylinder relies on continuous air pressure to maintain its position; if air is lost or the valve is centered, the piston will drift and cannot hold a load. For applications requiring true static holding during pressure loss, consider the BSE rod-lock variant. Additionally, the SUS420J2 rod offers excellent moisture resistance, but for highly aggressive chemical washdowns, upgrading to the SUS304 (code B) rod material might be warranted.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE63 Standard Cylinder SE63AX95S FAQ
The SE63AX95S features a 20 mm diameter SUS420J2 stainless steel rod with an M16x1.5 thread. At 0.5 MPa it provides 1559 N push and 1402 N pull force. At 0.7 MPa, push increases to 2182 N. The maximum push force is 318 kgf at 1.0 MPa.
Yes, the SE63AX95S is dimensionally interchangeable per ISO 15552 standards. You can use it as a direct replacement for other ISO 15552 profile cylinders, matching the 63 mm bore, 95 mm stroke, PT3/8 port, and standard mounting dimensions without altering your machine frame.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE63 Standard Cylinder SE63AX95S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.