Airtac SE63 Standard Cylinder SE63BX1000S
The AirTAC SE63 Standard Cylinder SE63BX1000S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 1000mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ63 mm
- Stroke1000 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SE63 Standard Cylinder SE63BX1000S
The AirTAC SE63BX1000S is a double-acting, single-rod ISO 15552 profile cylinder engineered for demanding linear motion. It delivers a robust 1559 N push force at 0.5 MPa, making it ideal for moving substantial loads over its 1000 mm stroke. The square extruded aluminum barrel eliminates external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames.
This specific configuration features a SUS304 stainless steel rod (code B) for superior resistance in corrosive or washdown environments, alongside a built-in magnet (code S) for position detection. The integrated magnet interfaces directly with AirTAC CMSE reed or DMSE electronic sensors, which seat neatly into the sensor grooves machined on three sides of the body.
Airtac SE63 Standard Cylinder SE63BX1000S Technical Specifications
| Model | Airtac SE63 Standard Cylinder SE63BX1000S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 1000 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE63 Standard Cylinder SE63BX1000S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×1000 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE63 Standard Cylinder SE63BX1000S Is Used
Bottling Line Diverter
Routes heavy beverage crates along packaging conveyors, utilizing the 1000 mm stroke and 1559 N push to shift products smoothly between high-speed lanes.
Chemical Dip Hoist
Lowers and raises parts racks in corrosive plating tanks, relying on the SUS304 stainless rod to withstand caustic splashes during continuous immersion cycles.
Pallet Load Pusher
Sweeps assembled cartons onto waiting pallets at the end of a packing line, using the extended 1000 mm reach to clear the conveyor bed completely.
Is the Airtac SE63 Standard Cylinder SE63BX1000S the Right Cylinder?
Selecting this 63 mm bore makes sense when 50 mm cylinders (offering 982 N push at 0.5 MPa) lack the power for your load, but stepping up to an 80 mm bore (2513 N push) would be physically oversized. If your mechanism must hold a load vertically without continuous air pressure, note that this standard SE cylinder will drift; you should specify a BSE rod lock variant or utilize an external pilot-operated check valve.
Because this unit spans 1000 mm, the Ø20 mm rod and its bearing face significant bending moments under side loads; always guide the load externally to prevent premature seal failure. For retrofits, this model provides direct dimensional interchangeability per ISO 15552, uses a PT3/8 port, and accepts standard mounting accessories like TC or LB brackets.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE63 Standard Cylinder SE63BX1000S FAQ
At 0.5 MPa, this 63 mm bore cylinder provides 1559 N of push force and 1402 N of pull force. At 0.7 MPa, the push force increases to 2182 N, with a maximum push capacity of 318 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes, the SE63BX1000S is dimensionally interchangeable per ISO 15552, meaning it shares the exact same mounting footprint and rod thread dimensions as other standard ISO 15552 profile cylinders. You can use your existing mounting brackets and PT3/8 port connections without modification.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE63 Standard Cylinder SE63BX1000S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.