Airtac SE63 Standard Cylinder SE63BX150
The AirTAC SE63 Standard Cylinder SE63BX150 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 150mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ63 mm
- Stroke150 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SE63 Standard Cylinder SE63BX150
The AirTAC SE63BX150 is a double-acting single-rod ISO 15552 profile cylinder engineered for demanding environments. It delivers a robust 1559 N push at 0.5 MPa, utilizing a 63 mm bore and 150 mm stroke. The code 'B' indicates a SUS304 stainless steel piston rod, making this unit highly suitable for corrosive or washdown applications where standard carbon steel rods would fail.
Built to the ISO 15552 / VDMA 24562 standard, its square extruded aluminum barrel eliminates external tie rods, creating a compact, flush-mounting body that resists corrosion and simplifies fixture design. The cylinder relies on field-adjustable pneumatic cushioning at both ends to decelerate the piston near stroke end, softening hard impacts at operating speeds up to 30-800 mm/s. Note that this specific SKU lacks a built-in position-sensing magnet.
Airtac SE63 Standard Cylinder SE63BX150 Technical Specifications
| Model | Airtac SE63 Standard Cylinder SE63BX150 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 150 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE63 Standard Cylinder SE63BX150
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE63 Standard Cylinder SE63BX150 Is Used
Bottling Line Diverters
Ideal for routing stainless steel kegs or bottles in beverage plants, where the SUS304 rod withstands daily chemical washdowns and the 1559 N push force easily redirects heavy product flow.
Pallet Stretch Wrappers
Provides the precise 150 mm stroke to actuate film clamping and cutting mechanisms on automated packaging lines, utilizing its adjustable end cushions to prevent tearing.
CNC Chuck Loading Arms
Drives heavy raw bar stock into lathe chucks, benefiting from the rigid extruded profile barrel that mounts flush to guarding without tie-rod interference.
Is the Airtac SE63 Standard Cylinder SE63BX150 the Right Cylinder?
Selecting this 63 mm bore makes sense when your application requires the 1559 N push at 0.5 MPa. If you need less force, stepping down to the 50 mm bore yields 982 N push, while stepping up to the 80 mm bore provides 2513 N push. Because this is a standard 150 mm stroke within the 1500 mm maximum, it drops in easily as a dimensionally interchangeable replacement for other ISO 15552 cylinders, matching the PT3/8 port and M16x1.5 rod thread. To add position sensing, you would need an 'S' suffix variant equipped for CMSE or DMSE switches.
Keep in mind that a plain double-acting cylinder does not hold its load if air pressure is lost or the valve is centered; the piston will drift. If your process requires secure load holding without live pressure, consider the BSE rod-lock variant or an external pilot-operated check valve.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE63 Standard Cylinder SE63BX150 FAQ
At 0.5 MPa, this 63 mm bore cylinder provides 1559 N of push force and 1402 N of pull force. At 0.7 MPa, the push force increases to 2182 N. The absolute maximum push capacity is 318 kgf when operated at the 1.0 MPa pressure limit.
Yes, the SE63BX150 is dimensionally interchangeable per ISO 15552, meaning it shares the exact same mounting footprint, port sizes (PT3/8), and rod thread (M16x1.5) as other standard ISO 15552 profile cylinders, allowing for a direct retrofit.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE63 Standard Cylinder SE63BX150
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.