
The AirTAC SE63 Standard Cylinder SE63BX175SH is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 175mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63BX175SH is a double-acting single-rod ISO 15552 profile cylinder engineered for demanding environments. It delivers a robust 1559 N push force at 0.5 MPa (2182 N at 0.7 MPa) across its 175 mm stroke. Built with a SUS304 stainless steel rod and FKM Viton seals, it withstands corrosive washdowns and sustained heat up to 150 C.
The extruded aluminum barrel eliminates external tie rods, yielding a compact, flush-mounting body that resists corrosion and simplifies fixture integration. An integrated -S magnet pairs directly with CMSE reed and DMSE electronic sensors for precise end-of-stroke detection, while field-adjustable pneumatic cushioning at both ends allows you to dial in deceleration and soften hard mechanical impacts.
| Model | Airtac SE63 Standard Cylinder SE63BX175SH |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 175 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Leveraging the SUS304 rod and 150 C FKM seals, this cylinder reliably diverts sealed vials on a stainless steel belt line during daily high-temperature CIP washdowns.
The 175 mm stroke and 1559 N push force securely compress corrugated cartons at the glue station, while the adjustable cushioning prevents sudden jarring that could disrupt wet adhesive.
Actuating a heavy immersion-tank diverter valve, the FKM seals withstand aggressive solvent vapors while the -S magnet triggers DMSE sensors to confirm gate position.
Operating within a 63 mm bore class, this cylinder generates 1559 N of thrust at 0.5 MPa. If your application requires less force, stepping down to the 50 mm bore yields 982 N push, whereas upgrading to the 80 mm bore provides 2513 N for heavier payloads. The PT3/8 port and M16x1.5 rod thread match standard ISO 15552 mounting dimensions, ensuring a seamless direct retrofit for existing actuator footprints.
For any stroke length of 300 mm or more, an external guide is recommended to prevent rod-bearing bending under side loads. Note that a plain SE cylinder relies on live air pressure to hold its position; if a machine loses air or the valve centers, the piston will drift. For fail-safe load holding, consider the BSE rod-lock variant or an external pilot-operated check valve.
Quick checklist
At 0.5 MPa, this 63 mm bore cylinder provides 1559 N push and 1402 N pull. At 0.7 MPa, the push increases to 2182 N. The maximum push force is 318 kgf when operating at the 1.0 MPa pressure limit.
Yes. The SE63BX175SH is dimensionally interchangeable per ISO 15552 standards, meaning you can drop it into existing mounting hardware and use standard accessories without modifying the footprint.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.