Airtac SE63 Standard Cylinder SE63BX200FTC
The AirTAC SE63 Standard Cylinder SE63BX200FTC is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 200mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ63 mm
- Stroke200 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SE63 Standard Cylinder SE63BX200FTC
The AirTAC SE63BX200FTC is a double-acting single-rod ISO 15552 profile cylinder engineered for demanding washdown and corrosive environments. Equipped with a SUS304 stainless steel rod, it delivers a robust 1559 N push force at 0.5 MPa alongside a 1402 N pull force. The extruded aluminum barrel design omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames while resisting debris buildup.
This 63mm bore actuator features a field-adjustable pneumatic cushion at both ends, allowing technicians to tune end-of-stroke deceleration via a set screw rather than relying on fixed rubber bumpers. It carries an FTC mounting interface and utilizes a PT3/8 port. Because this specific SKU lacks the -S magnet code, it is not natively equipped for CMSE or DMSE position sensing out of the box.
Airtac SE63 Standard Cylinder SE63BX200FTC Technical Specifications
| Model | Airtac SE63 Standard Cylinder SE63BX200FTC |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE63 Standard Cylinder SE63BX200FTC
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE63 Standard Cylinder SE63BX200FTC Is Used
Stainless Steel Palletizer
Utilizing the 1559 N push force and 200mm stroke, this SUS304-rod cylinder lifts and positions filled food-grade pallets through high-moisture washdown zones without surface corrosion.
Pharmaceutical Mixer Gate
The FTC mount and 1402 N retract force securely open and close heavy hopper gates on active pharmaceutical mixing stations, relying on the clean-profile barrel to prevent particulate trapping.
Marine Component Conveyor
Leveraging the 2182 N push at 0.7 MPa, this actuator diverts heavy metal sub-assemblies along a coastal manufacturing line where the SUS304 rod withstands ambient salt-spray exposure.
Is the Airtac SE63 Standard Cylinder SE63BX200FTC the Right Cylinder?
When sizing this 63mm bore actuator, compare its 1559 N push at 0.5 MPa against the next size down, the 50mm bore, which yields 982 N of push force. If your application requires greater thrust, stepping up to the 80mm bore provides 2513 N at 0.5 MPa. The integrated FTC mounting accessory simplifies front-trunnion attachment, while the standardized ISO 15552 footprint ensures direct dimensional interchangeability with other profile cylinders of the same standard.
Note that a plain SE cylinder cannot hold a load or maintain its position if air pressure is lost or the valve is centered; the piston will drift. The adjustable air cushion only decelerates the piston near stroke end and does not act as a mechanical brake. For position-holding safety, consider the BSE rod lock variant or an external pilot-operated check valve.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE63 Standard Cylinder SE63BX200FTC FAQ
At 0.5 MPa, this 63mm bore cylinder provides 1559 N of push force and 1402 N of pull force. At 0.7 MPa, the push force reaches 2182 N, with a maximum push capacity of 318 kgf at 1.0 MPa. It operates at pressures from 0.15-1.0 MPa with a speed range of 30-800 mm/s.
Yes, the SE63BX200FTC is dimensionally interchangeable per ISO 15552 / VDMA 24562 standards, serving as a direct replacement for other profile cylinders. It features a PT3/8 port, a 20mm SUS304 stainless steel rod, and an FTC mounting interface. Note that this specific SKU lacks a magnet, so it will not trigger CMSE or DMSE sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE63 Standard Cylinder SE63BX200FTC
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.