Airtac SE63 Standard Cylinder SE63BX200SH
The AirTAC SE63 Standard Cylinder SE63BX200SH is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 200mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ63 mm
- Stroke200 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SE63 Standard Cylinder SE63BX200SH
The AirTAC SE63BX200SH is a double-acting single-rod profile cylinder built to the ISO 15552 / VDMA 24562 dimensional standard. It features a 63 mm bore and a 200 mm stroke, generating 1559 N of push force and 1402 N of pull force at 0.5 MPa. Equipped with a SUS304 stainless steel rod and Viton (FKM) seals, this variant operates reliably in elevated temperatures up to 150 C and corrosive washdown environments.
The extruded aluminum barrel lacks external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames. Integrated sensor grooves on three sides accept CMSE reed and DMSE electronic switches, leveraging the built-in S magnet for precise end-of-stroke detection. Field-adjustable pneumatic cushioning at both ends allows you to tune deceleration and soften hard end stops during high-speed 30-800 mm/s cycling.
Airtac SE63 Standard Cylinder SE63BX200SH Technical Specifications
| Model | Airtac SE63 Standard Cylinder SE63BX200SH |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE63 Standard Cylinder SE63BX200SH
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE63 Standard Cylinder SE63BX200SH Is Used
Chemical Dip-Rack Elevation
Lifts immersion racks in chemical wash tanks using the SUS304 rod and FKM seals to withstand 150 C thermal exposure and corrosive vapors.
Hot-Melt Glue Dispense Head
Actuates a precision applicator valve on a carton sealer, using the 1559 N push force to drive the nozzle into heavy corrugated board.
Food-Grade Conveyor Diverter
Pushes stainless steel guide rails on a packaging line, relying on the tie-rod-free profile for easy washdown and the S magnet with DMSE sensors for position feedback.
Is the Airtac SE63 Standard Cylinder SE63BX200SH the Right Cylinder?
This 63 mm bore provides 1559 N push at 0.5 MPa. If your load requires less force, stepping down to the 50 mm bore yields 982 N of push, while moving up to the 80 mm bore provides 2513 N for heavier payloads. The standardized ISO 15552 mounting interface ensures this cylinder is a direct dimensional replacement for other ISO 15552 profile cylinders, sharing standard FA, LB, or TC mounting accessories and a PT3/8 port.
Because this is a double-acting cylinder, it does not hold its position if air pressure is lost or the valve is centered; the piston will drift. If your application requires static load holding, consider the BSE rod lock variant. Additionally, at 200 mm stroke, the 20 mm rod and M16x1.5 thread handle moderate side loads, but for long unsupported overhangs, an external guide bearing is recommended to prevent rod bending.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE63 Standard Cylinder SE63BX200SH FAQ
At 0.5 MPa, the push force is 1559 N and the pull force is 1402 N. At 0.7 MPa, the push force is 2182 N. The maximum push force is 318 kgf at 1.0 MPa.
Yes, the SE63BX200SH is dimensionally interchangeable per ISO 15552 and serves as a direct replacement for other standard profile cylinders. It uses a PT3/8 port and standard mounting hardware, while the built-in S magnet works directly with AirTAC CMSE and DMSE sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE63 Standard Cylinder SE63BX200SH
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.