
The AirTAC SE63 Standard Cylinder SE63BX400SCA is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 400mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63BX400SCA is a double-acting, single-rod ISO 15552 profile cylinder engineered for a 63 mm bore and 400 mm stroke. It delivers a robust 1559 N push force at 0.5 MPa, making it well-suited for demanding mid-weight directional control tasks. The extruded aluminum barrel omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames while freeing up valuable surrounding space.
This specific configuration integrates a SUS304 stainless steel rod (code B) for superior resistance in washdown or corrosive settings, a built-in magnet (code S) for CMSE and DMSE position sensing, and a CA single clevis mounting accessory. Field-adjustable pneumatic cushioning at both ends allows you to tune end-of-stroke deceleration via a set screw, softening hard mechanical impacts during high-speed 30-800 mm/s cycles.
| Model | Airtac SE63 Standard Cylinder SE63BX400SCA |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 400 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×400 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Leveraging the 1559 N push at 0.5 MPa and 400 mm stroke, this cylinder actuates heavy metal chip diverter gates on CNC machining centers, while the SUS304 rod withstands coolant spray.
The CA single clevis mount provides a secure pivot for rotating loaded pallets 90 degrees on packaging lines, utilizing the 2182 N force at 0.7 MPa to overcome inertial resistance.
In chemical treatment plants, the SUS304 rod and no-tie-rod profile resist corrosive vapors while driving 400 mm diverter valves to route acidic effluent into neutralization tanks.
If your application requires less force, the neighboring 50 mm bore provides 982 N of push at 0.5 MPa, whereas stepping up to the 80 mm bore yields 2513 N for heavier payloads. Because this is a 400 mm stroke, the unsupported piston rod is highly susceptible to bending under lateral loads; an external guide mechanism is strongly recommended to prevent rod-bearing damage. As a dimensionally interchangeable ISO 15552 component, it serves as a direct replacement for other ISO 15552 cylinders, utilizing the existing PT3/8 port, CA clevis mount, and S magnet hardware without requiring structural redesign.
Quick checklist
The SE63BX400SCA generates 1559 N of push force and 1402 N of pull force at 0.5 MPa, 2182 N of push force at 0.7 MPa, and a maximum push of 318 kgf at 1.0 MPa. It features a PT3/8 port and a 20 mm diameter SUS304 stainless steel rod.
No, the standard SE cylinder does not hold its position or load when air is exhausted or the valve is centered; the piston will drift. The field-adjustable air cushion at both ends only decelerates the piston near the stroke end and does not function as a locking mechanism. For load-holding requirements, consider the BSE rod lock variant or an external pilot-operated check valve.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.