Airtac SE63 Standard Cylinder SE63BX750S
The AirTAC SE63 Standard Cylinder SE63BX750S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 750mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ63 mm
- Stroke750 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SE63 Standard Cylinder SE63BX750S
The AirTAC SE63BX750S is a double-acting, single-rod ISO 15552 profile cylinder engineered for demanding linear motion tasks. Operating at 0.15-1.0 MPa, it delivers a robust 1559 N push force at 0.5 MPa and features a 750 mm stroke. The square extruded aluminum barrel omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames while protecting internal components.
This specific configuration integrates a SUS304 stainless steel rod (code B) for superior resistance in corrosive or washdown environments. Equipped with a built-in magnet (code S), it supports AirTAC CMSE reed and DMSE electronic sensors for precise end-of-stroke detection. The field-adjustable air cushions at both ends allow you to tune deceleration via a set screw, softening hard mechanical stops during high-speed 30-800 mm/s cycles.
Airtac SE63 Standard Cylinder SE63BX750S Technical Specifications
| Model | Airtac SE63 Standard Cylinder SE63BX750S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 750 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE63 Standard Cylinder SE63BX750S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×750 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE63 Standard Cylinder SE63BX750S Is Used
Corrosive-Resistant Palletizer
With its SUS304 rod delivering 1559 N of push force, this cylinder is ideal for lifting and positioning heavy pallets in food-grade or chemical washdown environments.
Automated Log Pusher
The 750 mm stroke provides the extended reach needed to index timber or pipe off a processing line, while adjustable cushions absorb the kinetic energy of the 63 mm bore at cycle end.
Water-Jet Conveyor Transfer
The stainless steel rod and double-acting operation excel in wet material transfer stations, moving processed parts reliably between treatment tanks without rusting.
Is the Airtac SE63 Standard Cylinder SE63BX750S the Right Cylinder?
Stepping up from a 50 mm bore (982 N push at 0.5 MPa) to this 63 mm model provides a significant 59% increase in thrust, yielding 1559 N for heavier actuation. If your load requires even more power, the 80 mm bore offers 2513 N. Remember that a standard SE cylinder relies on live air pressure to hold position; if air is lost, the piston drifts. For positive holding, consider the BSE rod lock variant. Because this 750 mm stroke creates a long unsupported rod span, an external guide is strongly recommended to prevent rod-bearing bending under side loads. As a true ISO 15552 cylinder, it is dimensionally interchangeable with other ISO 15552 profile cylinders, utilizing shared mounting hardware like FA front flanges or TC trunnions.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE63 Standard Cylinder SE63BX750S FAQ
This 63 mm bore cylinder generates 1559 N of push force and 1402 N of pull force at 0.5 MPa. At 0.7 MPa, the push force is 2182 N, with a maximum push capacity of 318 kgf at 1.0 MPa. It uses a PT3/8 port.
Yes, the SE series is built to the ISO 15552 / VDMA 24562 dimensional standard, making it a direct replacement for other ISO 15552 profile cylinders. The built-in magnet also works seamlessly with AirTAC CMSE and DMSE position sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE63 Standard Cylinder SE63BX750S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.