Airtac SE63 Standard Cylinder SE63BX80SH
The AirTAC SE63 Standard Cylinder SE63BX80SH is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 80mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ63 mm
- Stroke80 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SE63 Standard Cylinder SE63BX80SH
The AirTAC SE63BX80SH is a double-acting, single-rod ISO 15552 profile cylinder engineered for severe environments. It generates 1559 N of push force and 1402 N of pull force at 0.5 MPa, utilizing a 63 mm bore and an 80 mm stroke. Built with a SUS304 stainless steel piston rod and FKM Viton seals, this variant reliably operates in temperatures up to 150 degrees Celsius while resisting corrosive washdowns.
Its extruded aluminum barrel eliminates external tie rods, yielding a compact footprint that mounts flush against machinery while exposing standardized ISO 15552 dimensions for seamless retrofitting. The integrated magnet (-S) directly supports AirTAC CMSE reed and DMSE electronic position switches, and the field-adjustable pneumatic cushioning at both ends allows precise deceleration tuning to eliminate hard end-stop impacts.
Airtac SE63 Standard Cylinder SE63BX80SH Technical Specifications
| Model | Airtac SE63 Standard Cylinder SE63BX80SH |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 80 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE63 Standard Cylinder SE63BX80SH
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE63 Standard Cylinder SE63BX80SH Is Used
Bottle Sterilization Ejector
Utilizes the 1559 N push force and FKM Viton seals to reliably eject glass containers from a 150-degree Celsius steam sterilization tunnel without degrading the piston rod.
CNC Chip Conveyor Gate
Employs the SUS304 stainless rod and 80 mm stroke to actuate a wiper gate on a metalworking conveyor, resisting acidic cutting fluid washdown.
Hot-Melt Pallet Plunger
Leverages the 36 mm adjustable cushion length to softly stop the 1402 N retract cycle when positioning a hot-melt adhesive applicator over incoming pallets.
Is the Airtac SE63 Standard Cylinder SE63BX80SH the Right Cylinder?
When sizing this 63 mm bore cylinder, evaluate your load against its 1559 N push at 0.5 MPa. If your application requires less force, stepping down to the 50 mm bore reduces output to 982 N, saving space and air consumption. Conversely, heavier loads necessitate stepping up to the 80 mm bore, which provides 2513 N of push force. Because this is a double-acting cylinder, it cannot hold a load unpowered—air loss or a centered valve will cause drift; use a BSE rod lock for fail-safe positioning.
This SE63BX80SH configures a direct ISO 15552 replacement with its 63 mm bore, 80 mm stroke, PT3/8 port, and standard mounting accessories. The 20 mm diameter rod with an M16x1.5 thread handles moderate side loads well, though any stroke exceeding 300 mm requires an external guide to prevent rod-bearing bending.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE63 Standard Cylinder SE63BX80SH FAQ
At 0.5 MPa, the SE63BX80SH delivers 1559 N of push force and 1402 N of pull force. At 0.7 MPa, the push force reaches 2182 N, with a maximum push capacity of 318 kgf at 1.0 MPa. Thanks to the Viton (FKM) seals, it operates reliably across a 0 to 150 degrees Celsius temperature range.
Yes. The SE63BX80SH is dimensionally interchangeable per ISO 15552 standards, meaning it shares the exact same mounting footprint, 63 mm bore, 80 mm stroke, and PT3/8 port locations. You can swap it directly with other ISO 15552 profile cylinders without altering the machine's existing mounting hardware.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE63 Standard Cylinder SE63BX80SH
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.