
The AirTAC SE63 Standard Cylinder SE63X100FA is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 100mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63X100FA is a double-acting single-rod profile cylinder built to the ISO 15552 standard. It features a 63 mm bore and a 100 mm stroke, generating 1559 N of push force and 1402 N of pull force at 0.5 MPa. The square extruded aluminum barrel lacks external tie rods, offering a flush, corrosion-resistant body that simplifies mounting and keeps the assembly compact.
This FA variant includes a front flange mounting interface for rigid front-end attachment. Because this specific SKU is supplied without a built-in magnet, it does not support direct CMSE or DMSE position sensing. The field-adjustable pneumatic cushioning at both stroke ends allows technicians to tune end-of-stroke deceleration, softening hard impacts during high-speed 30-800 mm/s operation.
| Model | Airtac SE63 Standard Cylinder SE63X100FA |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Drives the forming jaws on automated carton erectors, using the 1559 N push force to cleanly fold and seal corrugated packaging blanks at cycle speeds up to 800 mm/s.
Positions the backgauge stop on a sheet metal press brake, where the FA front flange provides rigid mounting and the adjustable cushion absorbs the kinetic energy of rapid repositioning.
Ejects plastic parts from an injection moulding machine, relying on the 1402 N retract force to pull the part free before the robot arm extracts it.
If your application requires less force, the 50 mm bore provides 982 N of push at 0.5 MPa, while stepping up to the 80 mm bore yields 2513 N. This SE63X100FA specifies a 63 mm bore, 100 mm stroke, PT3/8 port, and an FA front flange mount. Note that a plain double-acting cylinder drifts when air is lost or a valve is centered; use a BSE rod lock for fail-safe load holding. For stroke lengths of 300 mm or more, the 20 mm rod and M16x1.5 thread face increased bending moments, making an external guide rail advisable to prevent side-load bearing wear.
Quick checklist
At 0.5 MPa, the SE63X100FA delivers 1559 N of push force and 1402 N of pull force. At 0.7 MPa, the push force reaches 2182 N. The absolute maximum push force is 318 kgf (approximately 3118 N) at the maximum operating pressure of 1.0 MPa.
Yes, the SE63X100FA is dimensionally interchangeable per ISO 15552, meaning it shares the exact same mounting footprint, port locations, and rod thread dimensions as other ISO 15552 profile cylinders. You can drop it into existing FA front flange setups without modifying the machine frame.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.