
The AirTAC SE63 Standard Cylinder SE63X100SLB is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 100mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63X100SLB is a double-acting, single-rod ISO 15552 profile cylinder engineered for rigorous pneumatic control. Featuring a 63 mm bore and 100 mm stroke, it generates 1559 N of push force at 0.5 MPa and 2182 N at 0.7 MPa. The square extruded aluminum barrel eliminates external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames while protecting internal mechanics from washdown debris.
This specific configuration includes a built-in magnet (S) for seamless integration with AirTAC CMSE reed and DMSE electronic position sensors. It utilizes an LB foot mounting bracket for rigid base attachment. The field-adjustable air cushioning at both ends allows technicians to dial in end-of-stroke deceleration via a set screw, softening hard mechanical stops during high-speed 30-800 mm/s cycling.
| Model | Airtac SE63 Standard Cylinder SE63X100SLB |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Provides the 1559 N push force at 0.5 MPa required to reliably erect and fold heavy corrugated carton blanks at cycle speeds up to 800 mm/s.
Uses the 100 mm stroke and LB foot mount to push 63 mm bore payloads cleanly off a high-speed packaging conveyor without overwhelming the frame.
Applies consistent 1402 N pull force to hold aluminum castings in place during light machining, utilizing the DMSE sensor to confirm clamp engagement.
If your application requires less force, stepping down to a 50 mm bore yields 982 N of push at 0.5 MPa, while moving up to an 80 mm bore provides 2513 N. Remember that a standard SE cylinder relies on live air pressure to maintain its position; if air is lost or the valve centers, the piston will drift. For positive load holding without continuous pressure, consider the BSE rod-lock variant. To retrofit this model, match the 63 mm bore, 100 mm stroke, PT3/8 port, LB foot mounting, and the -S magnet requirement.
AirtacDistr lists every SE63 order code with its price on one page at https://airtacdistr.com/products/airtac-se63-iso-air-cylinder
Quick checklist
At 0.5 MPa, the SE63X100SLB delivers 1559 N of push force and 1402 N of pull force. At 0.7 MPa, the push force increases to 2182 N. The maximum push force is 318 kgf at 1.0 MPa, and the operational speed range is 30-800 mm/s.
Yes, the SE63X100SLB is dimensionally interchangeable per the ISO 15552 / VDMA 24562 standard. You can drop it directly into existing ISO 15552 mounting hardware and use it alongside cylinders from other manufacturers without altering the footprint.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.