
The AirTAC SE63 Standard Cylinder SE63X105S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 105mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63X105S is a double-acting, single-rod ISO 15552 profile cylinder engineered to deliver a robust 1559 N push force at 0.5 MPa. Its square extruded aluminum barrel omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush within tight machine envelopes.
Equipped with a built-in magnet (-S), this unit seamlessly integrates AirTAC CMSE reed and DMSE electronic sensors for precise end-of-stroke detection. The field-adjustable pneumatic cushioning at both ends allows technicians to dial in end-stop deceleration, softening impacts during high-speed 30-800 mm/s cycles.
| Model | Airtac SE63 Standard Cylinder SE63X105S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 105 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×105 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Routes heavy glass beverage containers on a high-speed packaging line, utilizing the 1559 N push force and 105 mm stroke to pivot guide arms reliably.
Drives an automated bar feeder mechanism into the spindle, using the integrated DMSE sensor to confirm the 105 mm stroke position before the chuck clamps.
Folds heavy cardboard flaps on a case erector, where the adjustable end cushions absorb the kinetic energy from the 30-800 mm/s cycle to prevent hard mechanical impacts.
Delivering 1559 N of push force at 0.5 MPa, this 63 mm bore is a mid-range powerhouse. If your application requires less energy, the 50 mm bore offers 982 N of push; conversely, stepping up to the 80 mm bore provides 2513 N for heavier payloads. Remember that a standard SE cylinder relies on live air pressure to hold its load—without continuous pressure, the piston will drift, so a BSE rod lock is necessary for fail-safe holding.
As a dimensionally interchangeable ISO 15552 component, the SE63X105S serves as a direct replacement for other ISO 15552 cylinders, reusing existing mounting hardware like FA front flanges or TC trunnions. The 105 mm stroke is well below the 1500 mm maximum standard, keeping the 20 mm rod highly rigid without requiring an external guide support.
AirtacDistr lists every SE63 order code with its price on one page at https://airtacdistr.com/products/airtac-se63-iso-air-cylinder
Quick checklist
At 0.5 MPa, the SE63X105S generates 1559 N of push force and 1402 N of pull force. At 0.7 MPa, the push force reaches 2182 N. The maximum allowable operating pressure is 1.0 MPa, which yields a maximum push force of 318 kgf.
Yes, the SE63X105S is dimensionally interchangeable per ISO 15552 standards. It shares the exact mounting footprint and PT3/8 port location of other ISO 15552 profile cylinders, allowing you to drop it into existing machinery without modifying the base plate or plumbing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.